Nitrogen Oxide Sensor - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Show/hide table
| Required Tooling | |||
| Tool | Part Number | Part Description | Qty |
| A | 468-8116 | Slotted Socket | 1 |
| B | - | Loctite C5A Copper Anti-Seize | - |
Note: Ensure that the nitrogen oxide sensor is not dropped or knocked. If the nitrogen oxide sensor, has been dropped or knocked the nitrogen oxide sensor must be replaced as an assembly.
Show/hide table
| |
| Illustration 1 | g06289553 |
Show/hide table
| |
| Illustration 2 | g06290308 |
Show/hide table
| |
| Illustration 3 | g06290409 |
|
Remove all cable straps. | |
Show/hide table
| |
| Illustration 4 | g06290323 |
Show/hide table
| |
| Illustration 5 | g06290380 |
|
Remove all cable straps. | |
Show/hide table
| |
| Illustration 6 | g06290407 |
- Install the nitrogen oxide sensors in the reverse order of removal.
Show/hide table
| |
| Illustration 7 | g06290439 |
Show/hide table
| |
| Illustration 8 | g06290434 |
Caterpillar Information System:
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Stick Cylinder
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Control Valve (Stick Lowering)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Stick System)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Boom Cylinder - Swing Boom
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement DEF Injector and Mounting - Remove and Install
336, 336 GC and 340 Excavator Systems Hydraulic Oil Cooler Lines Group
336 and 336 GC Excavator Swing Drive Oil Sample - Obtain
336, 336 GC and 340 Excavator Systems Hydraulic Oil Cooler Lines Group
336 and 336 GC Excavator Swing Drive Oil Level - Check
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Boom Cylinder
336 and 336 GC Excavator Swing Drive Oil - Change
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553} Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Bucket System)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Bucket Cylinder
336, 336 GC and 340 Excavator Systems Stick Cylinder Lines
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Swing Frame
336, 336 GC and 340 Excavator Systems Hydraulic Oil Lines
336, 336 GC and 340 Excavator Systems Pump Coupling
336, 336 GC and 340 Excavator Systems Hydraulic Pedal Control (Travel)
336, 336 GC and 340 Excavator Systems Position Sensor and Mounting
336, 336 GC and 340 Excavator Systems Hydraulic Tank and Filter
336 Excavator Machine Systems Travel Motor - Disassemble
336 Excavator Machine Systems Travel Motor - Assemble
336, 336 GC and 340 Excavator Systems Pilot Lines