Pilot Lines
Show/hide table
| |
| Illustration 1 | g06290351 |
|
Right side view | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| - | Sharp corners at the cutting edge of each cable strap shall not be allowed. | ||
| 1 | 1 | 6E-4701 Check Valve Gp | Torque to |
| 2 | - | - | Tighten the nut to |
| 3 | 3 | 338-6971 Pressure Sensor Gp | Before assembly, apply thin hydraulic oil to outside diameter of male thread.
Torque to Operating voltage is 7 to 14 VDC. Output type is PWM. |
| 4 | 1 | 350-0836 Hose As | Torque to |
Caterpillar Information System:
336 Excavator Machine Systems Travel Motor - Assemble
336 Excavator Machine Systems Travel Motor - Disassemble
336, 336 GC and 340 Excavator Systems Hydraulic Tank and Filter
336, 336 GC and 340 Excavator Systems Position Sensor and Mounting
336, 336 GC and 340 Excavator Systems Hydraulic Pedal Control (Travel)
336, 336 GC and 340 Excavator Systems Pump Coupling
336, 336 GC and 340 Excavator Systems Hydraulic Oil Lines
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Swing Frame
336, 336 GC and 340 Excavator Systems Stick Cylinder Lines
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Bucket Cylinder
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Bucket System)
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Nitrogen Oxide Sensor - Remove and Install
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Turbocharger - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Swing System)
307, 308, 309 and 310 EXCAVATOR Air Cleaner
3608 Engine Maintenance Interval Schedule
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Clean Emissions Module - Remove and Install
336, 336 GC and 340 Excavator Systems Hydraulic System Air - Purge - Fan Pump
336, 336 GC and 340 Excavator Systems Hydraulic System Air - Purge - Auxiliary Pump and PTO Drive
307, 308, 309 and 310 EXCAVATOR Air Conditioner Lines
307, 308, 309 and 310 EXCAVATOR Air Cleaner
307, 308, 309 and 310 EXCAVATOR Blade Lift Cylinder
PM820, PM822, and PM825 Cold Planer Machine Systems Control Valve - Remove and Install - Rear
C27 and C32 Generator Set Engines Fan Drive - Remove and Install - Upper Fan Drive