Pilot Lines
Show/hide table
Illustration 1 | g06280723 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
Sharp corners at the cutting edge of each cable strap shall not be allowed. | |||
1 | 2 | 148-8336 Connector As | Torque to |
2 | 2 | 148-8378 Elbow As | Torque to |
3 | 1 | 164-6874 Elbow Fitting | Torque to |
4 | 1 | 454-5075 Pressure Sensor Gp | Before assembly, apply a thin film of clean hydraulic oil to the outside diameter of the male threads. |
5 | 1 | 148-8435 Tee As | Torque to |
Caterpillar Information System:
C7.1 Marine Propulsion Engine Crankshaft - Remove
C7.1 Marine Propulsion Engine Crankshaft Timing Ring - Remove and Install
336 and 336 GC Excavator Diesel Exhaust Fluid - Fill - Emission Related Component
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Maintenance Interval Schedule
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Caterpillar Approved Work Tools
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Window Washer Reservoir - Fill
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Undercarriage - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Travel Alarm - Test - If Equipped
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Track Adjustment - Inspect
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Track Adjustment - Adjust
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Thumb - Lubricate - If Equipped
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Swing Gear and Bearing - Inspect
C7.1 Marine Propulsion Engine Crankshaft - Install
SCR Retrofit Aftertreatment Kit DEF Injector and Mounting - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Mounting and Dismounting
SCR Retrofit Aftertreatment Kit Temperature Sensor (Exhaust Inlet) - Remove and Install
SCR Retrofit Aftertreatment Kit Temperature Sensor (Exhaust Outlet) - Remove and Install
SCR Retrofit Aftertreatment Kit Pressure Sensor (Exhaust Inlet) - Remove and Install
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800} Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Mini Hydraulic Excavator Monitoring System General Information
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
Mini Hydraulic Excavator Monitoring System Prestart Monitoring Function
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper
336, 336 GC and 340 Excavator Systems Accumulator (Pilot)