Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Start By:
- Remove the crankshaft.
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Support the crankshaft on a suitable stand.
| |
| Illustration 1 | g06280625 |
Note: Carefully remove the crankshaft timing ring. Ensure that seal surface (X) of the crankshaft is not damaged when the crankshaft timing ring is removed.
Note: Do not remove the dowel from the crankshaft unless the dowel is damaged.
| |
| Illustration 2 | g06280837 |
If the dowel was removed during removal, install a new dowel to the crankshaft.
Ensure that the threaded holes of the crankshaft are clean and free contaminates.
Position the new crankshaft timing ring on the crankshaft with the teeth toward the crankshaft web. Align the hole in the crankshaft timing ring with the dowel in the crankshaft. Carefully install the crankshaft timing ring to the crankshaft.
Note: Ensure that seal surface (X) on the crankshaft is not damaged when the crankshaft timing ring is installed.
Note: The new allen head screws must be Microencapsulated Anaerobic Sealant (MEAS) type allen head screws.
End By:
- Install the crankshaft.