C32 Marine Engines Caterpillar


Coolant Level Sensor - Remove and Install - (SCAC)

Usage:

C32 AX2

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。



注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。


  1. 排出冷却液,使冷却液液位低于传感器。 请参阅操作和保养手册 "冷却系统冷却液(ELC)- 更换" 以了解正确的排放和加注步骤。


    图 1g06234876

  2. 拆下冷却液液位传感器(SCAC) (1)。

安装步骤

  1. 按与拆卸相反的顺序安装冷却液液位传感器(SCAC) (1)。

    1. 将冷却液液位传感器 (1) 拧紧至扭矩为 22 ± 3 N.m (195 ± 27 lb in)

Caterpillar Information System:

C32 Marine Engines Coolant Level Sensor - Remove and Install
C32 Marine Engines Aftercooler - Install
320, 323 Excavator Engine Supplement Valve Mechanism Cover - Remove and Install
320GC Excavator Engine Supplement Refrigerant Compressor - Remove and Install
C32 Marine Engines Expansion Tank - Remove and Install
XQP1100 Generator Set Engine Oil and Filter - Change
XQP1100 Generator Set Fuel System - Prime
3512E Tier 4 Final Engines for Land Electric Drilling Crankcase Breather - Valve Cover Integrated Breathers with Closed Crankcase Ventilation
C7 Marine Engine Overhaul (Major)
320GC, 320 and 323 Excavators Machine Systems Pump Drive Coupling - Remove and Install
C32 Marine Engines Water Temperature Regulator - Remove and Install
XQP1100 Generator Set Circuit Breakers - Reset
C9.3B Engines General Information
Resolutions for Different Types of Belt Failures for 3500 and C175 Series Engines {1397} Resolutions for Different Types of Belt Failures for 3500 and C175 Series Engines {1397}
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Grade and Slope
C32 Marine Engines Engine Oil Filter Base - Remove
C9.3B Engines Electronic Control System Components
C9.3B Engines Cleanliness of Fuel System Components
C9.3B Engines Fuel System
C9.3B Engines Air Inlet and Exhaust System
C9.3B Engines Clean Emissions Module - Equipped with ARD
C9.3B Engines Diesel Exhaust Fluid Lines
330, 330GC Hydraulic Excavator Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.