Camshaft
Show/hide table
Illustration 1 | g06226355 |
Front of engine |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 1 | 421-0321 Camshaft | Lubricate the camshaft bearings, the journals, and the lobes with a 50/50 mixture of 8T-2998 Lubricant and clean engine oil.
The end of the camshaft that is marked "F" must be placed at the front of the engine. |
2 | 1 | 421-0320 Camshaft |
Show/hide table
Illustration 2 | g06226356 |
(3) Exhaust lobe
(4) Injector lobe (5) Inlet lobe |
Show/hide table
Item | Qty | Part | Specification Description |
A | - | - | Diameter of camshaft journal is |
Use the following procedure to determine the camshaft lobe lift:
1. Measure the camshaft lobe height (C). 2. Measure the base circle (D). 3. Subtract the base circle measurement in Step 2 from the camshaft lobe height in Step 1. The difference is the actual camshaft lobe lift (B). Specified camshaft lobe lift: For inlet lobe is For exhaust lobe is For injector lobe (right bank) is For injector lobe (left bank) is The maximum permissible difference between the actual camshaft lobe lift in Step 3 and the specified camshaft lobe lift is |
Caterpillar Information System:
C27 and C32 Tier 4 Final Marine Engines Camshaft
730,735 and 730 EJECTOR Articulated Truck Systems Temperature Sensor - Cab Air
C27 and C32 Tier 4 Final Marine Engines Engine Oil Level Sensor
C27 and C32 Tier 4 Final Marine Engines Engine Oil Level Sensor
C27 and C32 Tier 4 Final Marine Engines Electric Starting Motor
Regulatory Compliance Information Machine Security System - MSS3i and MSS S1 - If Equipped
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Linkage
320 GC, 320 and 323 Excavator Sound Information and Vibration Information
C9.3B Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
320GC Excavator Engine Supplement Alternator - Remove and Install
336 and 336 GC Excavator Fuel System Primary Filter (Water Separator) Element - Replace
336 and 336 GC Excavator Engine Oil Sample - Obtain
Regulatory Compliance Information Wireless Device - EC520 - If Equipped
Next Generation Hydraulic Excavator Monitoring System Warning Operation
Regulatory Compliance Information Wireless Device - TD520 - If Equipped
A New Turbocharger Is Available For Certain G3512 Engines {1052} A New Turbocharger Is Available For Certain G3512 Engines {1052}
New Engine Software is Now Available for Certain G3512 Engines {1920} New Engine Software is Now Available for Certain G3512 Engines {1920}
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom - Fore Boom Group - 3.3 m (10.83 ft)
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom - Stub Boom - 2.7 m (8.79 ft)
Next Generation Hydraulic Excavator Monitoring System Password Entry
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom - 8.9 m (29.2 ft)
G3516 TA Engine Crankshaft Position for Valve Lash Setting
New Design Change to the Lever Head on Certain C32 Engines {1915, 3065, 5910} New Design Change to the Lever Head on Certain C32 Engines {1915, 3065, 5910}
320 GC, 320 and 323 Excavator Machine Systems Specifications Swivel