320 GC, 320 and 323 Excavator Machine Systems Specifications Caterpillar

Boom - Stub Boom - 2.7 m (8.79 ft)

Usage:

323 HDT

Show/hide table




Illustration 1	g02727177
Typical example

Show/hide table

Table 1
Item	Qty	Part	Specification Description
All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for the pins, the stick, the upper frame, and the cylinder pin bores.
1	As required, use the following shims to adjust the maximum lateral clearance to 0.8 mm (0.03 inch):
	2	093-0084 Shim	Thickness is 1.0 mm (0.04 inch).
	1	113-2127 Shim	Thickness is 0.5 mm (0.02 inch).
	1	093-0116 Shim	Thickness is 2.0 mm (0.08 inch).
2	1	4I-4621 Pin As	Diameter is 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).
3	1	264-1702 Pin As	Diameter is 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).
4	As required, use the following shims to adjust the maximum lateral clearance to 0.8 mm (0.03 inch):
	2	093-0084 Shim	Thickness is 1.0 mm (0.04 inch).
	1	113-2127 Shim	Thickness is 0.5 mm (0.02 inch).
	1	093-0116 Shim	Thickness is 2.0 mm (0.08 inch).
5	1	176-2278 Pin	Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch).
6	2	166-1495 Lip Type Seal	Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
7	2	489-3008 Sleeve Bearing	Install the bearing in the bore so that the part number of the bearing is facing outward. Inside diameter before assembly is 90.21 ± 0.04 mm (3.552 ± 0.002 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch).

Caterpillar Information System:

320 GC, 320 and 323 Excavator Machine Systems Specifications Boom - Fore Boom Group - 3.3 m (10.83 ft)

New Engine Software is Now Available for Certain G3512 Engines {1920} New Engine Software is Now Available for Certain G3512 Engines {1920}

A New Turbocharger Is Available For Certain G3512 Engines {1052} A New Turbocharger Is Available For Certain G3512 Engines {1052}

Regulatory Compliance Information Wireless Device - TD520 - If Equipped

Next Generation Hydraulic Excavator Monitoring System Warning Operation

Regulatory Compliance Information Wireless Device - EC520 - If Equipped

C27 and C32 Tier 4 Final Marine Engines Camshaft

C27 and C32 Tier 4 Final Marine Engines Camshaft

730,735 and 730 EJECTOR Articulated Truck Systems Temperature Sensor - Cab Air

C27 and C32 Tier 4 Final Marine Engines Engine Oil Level Sensor

C27 and C32 Tier 4 Final Marine Engines Engine Oil Level Sensor

C27 and C32 Tier 4 Final Marine Engines Electric Starting Motor

Next Generation Hydraulic Excavator Monitoring System Password Entry

320 GC, 320 and 323 Excavator Machine Systems Specifications Boom - 8.9 m (29.2 ft)

G3516 TA Engine Crankshaft Position for Valve Lash Setting

New Design Change to the Lever Head on Certain C32 Engines {1915, 3065, 5910} New Design Change to the Lever Head on Certain C32 Engines {1915, 3065, 5910}

320 GC, 320 and 323 Excavator Machine Systems Specifications Swivel

320 GC, 320 and 323 Excavator Machine Systems Quick Coupler System - If Equipped

C27 and C32 Tier 4 Final Marine Engines Turbocharger Water Lines

320, 323 Excavator Engine Supplement Turbocharger - Remove and Install - Side Mounted Turbocharger

C27 and C32 Tier 4 Final Marine Engines Pressure Sensor

C27 and C32 Tier 4 Final Marine Engines Speed/Timing Sensor

Engine Rerate Process on Certain C4.4 and C7.1 Engines {1000, 1901, 1920} Engine Rerate Process on Certain C4.4 and C7.1 Engines {1000, 1901, 1920}

C9.3B Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install