Bucket Linkage
Show/hide table
Illustration 1 | g03860499 |
Typical example |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
- | Before assembly, coat all bores for the pins and the sealing lips with black 5P-0960 Grease Cartridge. | ||
1 | 6 | 166-1494 Lip Type Seal | Lubricate the sealing lip of lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss. |
2 | 2 | Bushing | Bore before assembly is Bore before assembly is Installation depth is |
3 | 1 | Pin | Diameter is |
4 | 2 | 451-2183 Nut | Position the nut (5) to the distance of Torque to |
5 | 2 | 451-2183 Nut | |
6 | - | 3B-8489 Grease Fitting | During assembly of linkage group on the machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick. |
7 | 1 | Pin | Diameter is |
8 | 2 | 087-5805 Pin As | Diameter is |
9 | 2 | Bushing | Bore before assembly is Bore before assembly is Installation depth is |
Show/hide table
(1) | For part number 244-4360 |
(2) | For part number 563-4063 |
(3) | For part number 240-2912 |
(4) | For part number 563-4064 |
Caterpillar Information System:
320 GC, 320 and 323 Excavator Sound Information and Vibration Information
C9.3B Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
320GC Excavator Engine Supplement Alternator - Remove and Install
336 and 336 GC Excavator Fuel System Primary Filter (Water Separator) Element - Replace
336 and 336 GC Excavator Engine Oil Sample - Obtain
New Software Is Now Used for Certain G3600B Series Engines {1920} New Software Is Now Used for Certain G3600B Series Engines {1920}
C27 and C32 Tier 4 Final Marine Engines Engine Mounting
C27 and C32 Tier 4 Final Marine Engines Engine Mounting
320, 323 Excavator Engine Supplement Fuel Priming Pump - Remove and Install
C1.5 and C2.2 Industrial Engines Cylinder Head - Install
C1.5 and C2.2 Industrial Engines Cylinder Head - Remove
C27 and C32 Tier 4 Final Marine Engines Control Panel (Engine)
Regulatory Compliance Information Machine Security System - MSS3i and MSS S1 - If Equipped
C27 and C32 Tier 4 Final Marine Engines Electric Starting Motor
C27 and C32 Tier 4 Final Marine Engines Engine Oil Level Sensor
C27 and C32 Tier 4 Final Marine Engines Engine Oil Level Sensor
730,735 and 730 EJECTOR Articulated Truck Systems Temperature Sensor - Cab Air
C27 and C32 Tier 4 Final Marine Engines Camshaft
C27 and C32 Tier 4 Final Marine Engines Camshaft
Regulatory Compliance Information Wireless Device - EC520 - If Equipped
Next Generation Hydraulic Excavator Monitoring System Warning Operation
Regulatory Compliance Information Wireless Device - TD520 - If Equipped
A New Turbocharger Is Available For Certain G3512 Engines {1052} A New Turbocharger Is Available For Certain G3512 Engines {1052}
New Engine Software is Now Available for Certain G3512 Engines {1920} New Engine Software is Now Available for Certain G3512 Engines {1920}