Track Roller (Single Flange)
Show/hide table
Illustration 1 | g03883494 |
Show/hide table
Specification for 422-2405 Track Roller Gp | |||
Item | Qty | Part | Specification Description |
1 | - | - | Before assembly, the surfaces must be clean and free of protective coating. |
2 | 2 | 8F-8711 O-Ring Seal | Lubricate the bore with the lubricant that is being sealed. |
3 | 1 | 481-4790 Track Roller Bearing | Bore after assembly is |
4 | 1 | 9W-2146 Plug | Before assembly, apply blue Loctite 243 to the threads.
Torque to |
5 | 2 | 475-8471 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of oil to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
- | - | - | End play for the track roller shaft:
Minimum is Maximum is |
Caterpillar Information System:
C1.7 and C2.2 Industrial Engines Product Lifting
C175 Tier 4 Final Engines for Off-Highway Trucks Engine Cranks but Does Not Start
C9.3B Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Cat ET Service Error Identifiers
C175 Tier 4 Final Engines for Off-Highway Trucks Exhaust Temperature Is Low
3512B Generator Set Engines with Dynamic Gas Blending Fuel System Operation
3512E Engines Fuel Pump (High Pressure) - Remove and Install
C9.3B Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove and Install
C12.9 Marine Propulsion Engine Cooling System - Test
New Front Window Group Is Now Available for Certain Excavators {7310} New Front Window Group Is Now Available for Certain Excavators {7310}
G3512H and G3516H Generator Set Engines Transfer Gearbox Seal - Install
G3512H and G3516H Generator Set Engines Transfer Gearbox Seal - Remove
A New 2D Filter is Now Available for C175 Engines {1252} A New 2D Filter is Now Available for C175 Engines {1252}
A New 2D Filter is Now Available for C175 Machine Engines {1252} A New 2D Filter is Now Available for C175 Machine Engines {1252}
C7.1 Marine Propulsion Engine Cold Start Strategy
C7.1 Marine Propulsion Engine Engine Monitoring System (EMS)
C7.1 Marine Propulsion Engine Gauges and Indicators
C7.1 Marine Propulsion Engine Before Starting Engine
G3516 TA Engine Ignition Primary - Test
C1.7 and C2.2 Industrial Engines Fan Clearance - Check
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Replace
C7.1 Marine Propulsion Engine Cold Weather Starting
C7.1 Marine Propulsion Engine Starting the Engine
C7.1 Marine Propulsion Engine After Starting Engine