The Cover Assemblies Have Been Updated That Are Now Used on the Clean Emission Module (CEM) For Certain 3516 Generator Set Engines {1062, 1091}
- Engine
- 3516C (S/N: SKC131-UP; SCJ1000-UP; SCK1000-UP; SFK129-UP)
Description Of Change: The updated cover assemblies utilize a more robust bolt hole pattern which allows for better compression of the gaskets to prevent leaking.
Adaptable To: The following changes are effective with all products after the listed serial numbers. The updated cover assemblies are not adaptable to the previous serial numbers listed above.
Show/hide table
Illustration 1 | g06113516 |
Example of the new DOC cover |
Show/hide table
Illustration 2 | g06116309 |
Example of the new SCR cover |
The new 509-5289 Exhaust Cover Gp and 509-5290 Exhaust Cover Gp are now used on the updated 445-6900 Clean Emission Module Gp.
The previous 351-6790 Exhaust Cover Gp and 374-4480 Exhaust Cover Gp are still available for the original 445-6900 Clean Emission Module Gp and 374-2501 Clean Emission Module Gp.
Caterpillar Information System:
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439} Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Supply - Test
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Signal (Analog, Passive) - Test
3500C Marine Engines Turbocharger
G3512 Generator Set Engines Crankcase Pressure Is Low
New Software Is Now Used for Certain C175-16 Engines {1920} New Software Is Now Used for Certain C175-16 Engines {1920}
Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256} Improved Fuel Transfer Pumps Are Used on Certain 3500 Commercial Engines {1256}
C13 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
A New Engine Oil Filter Element Is Now Used For Certain C175 Engines {1308} A New Engine Oil Filter Element Is Now Used For Certain C175 Engines {1308}
C175-16 Petroleum Generator Set Engines Engine Operation
C13 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C18 Marine Auxiliary and Marine Generator Set Engines Sensor Signal (Analog, Active) - Test
G3512 Generator Set Engine Electric Starting Motor - Remove and Install
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920} New Engine Software Is Now Used for Certain C9 Industrial Engines with 261 Kilowatt Rating {1920}
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290} Improved Fuel Injectors Are Now Used on Certain C18 Tier 4 Final Engines {1251, 1290}
A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064} A New Aftercooler Core Is Now Used On Certain 3512C Locomotive Engines {1064}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electronic Service Tools
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Service Information Report
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
C175-16 Locomotive Engines Maintenance Recommendations
PS097S and PS104S POWER SYSTEMS Machine Systems Electric Motor (Hydraulic Pump)
C175-16 Locomotive Engines Fuel System Primary Filter/Water Separator - Clean/Replace