Auxiliary Water Pump - Remove
- Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g06094535 - Disconnect harness assemblies (2). Remove bolts (1). Remove bolts (4). Remove tube assembly (3).
Show/hide table
Illustration 2 g06094556 - Attach a suitable lifting device onto auxiliary water pump (5). The weight of auxiliary water pump (5) is approximately
27 kg (60 lb) . Remove nuts (6). Remove auxiliary water pump (5).
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Oil Pressure Is Low
C175-16 and C175-20 Locomotive Engines Engine Oil Cooler - Install
C175-16 and C175-20 Locomotive Engines Engine Oil Cooler - Remove
C7.1 Marine Propulsion Engine Refill Capacities
C13 Engines for Caterpillar Built Machines Fuel Pressure Is High
C175-16 and C175-20 Locomotive Engines Engine Oil Filter Housing - Remove
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Component Location
C9 Marine Auxiliary and Generator Set Engines Overhaul (Major)
C175-16 and C175-20 Locomotive Engines Pistons, Liners, and Connecting Rods - Remove
C13 Engines for Caterpillar Built Machines Retarder - Test
C11, C13, C15, and C18 Industrial Engines Data Link - Test
C13 Engines for Caterpillar Built Machines Configuration Parameters
C11, C13, C15, and C18 Industrial Engines Coolant Temperature Is High
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Install
C13 Engines for Caterpillar Built Machines Engine Overspeeds
C13 Engines for Caterpillar Built Machines Fuel Temperature Is High
C9 Marine Generator Set Overhaul (Major)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diagnostic Capabilities
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electrical Connectors
C11, C13, C15, and C18 Industrial Engines Symptom Troubleshooting
C175-16 and C175-20 Locomotive Engines Crankshaft Main Bearings - Remove
C11, C13, C15, and C18 Industrial Engines Intake Manifold Air Temperature Is High
C13 Engines for Caterpillar Built Machines Coolant Level Is Low
C175-16 and C175-20 Locomotive Engines Engine Oil Filter Housing - Install