1983/01/19 Caterpillar


Improved Valve Covers Used

Usage:


D379, G379, D398, G398, D399 And G399 Engines

Description of Change: An improved valve cover is now used on the above engines. The change was made to improve the shape of the seal groove. This will give a better seal between the cylinder head assembly and the valve cover.

Adaptable As: The new 2N3598 Valve Cover is a direct replacement for the former 2N3598 Valve Cover. The part number did not change. The new 2N3598 Valve Cover has a mark in the shape of an "O" or a "C" that is located below the part number.

The new valve cover is in effect on the engines shown in the chart.

Caterpillar Information System:

1983/01/19 Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19 Replacement Seal Group For Raw Water Pump Shaft Now Has All The Seal Parts Plus An Installation Tool
1982/12/15 New 6V6146 Load Leveler Can Lift Larger Components
1982/12/15 Removal Of Water Pump Impeller
1982/12/15 Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15 6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/15 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15 List Of Service Publications
1982/12/15 Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1982/12/15 Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15 New Flexible Coupling Group Must Be Installed Correctly
1983/01/19 Added Methods To Decrease The Effects Of High Sulfur Fuels
1983/01/19 Parts Service Information For Pistons And Rings
1983/01/19 Correct Installation Of Valve Lifter Prevents Problems With Valve Lash Adjustment
1983/01/19 Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles
1983/01/19 Spring Seat Enlarger Available For Use On Cylinder Heads
1983/01/19 New Piston Design
1983/02/16 New Water Pump Has Improved Seal
1983/02/16 Service Information For Hydramechanical Shutoff Units
1983/02/16 New Expansion Tank And Support Used
1983/02/16 Notice: Bolts, Washers Can Fall Into Suction Screen Housing And Damage Oil Pump
1983/02/16 Special Instruction Available For "Troubleshooting And Repair Of The 6V2100 Multitach"
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.