- Drain diesel exhaust fluid into a suitable container for storage or disposal.
Show/hide table
Illustration 1 g03365452 Note: Refer to Special Instruction, REHS8231, "Removal Procedures for Diesel Exhaust Fluid (DEF) Connectors" for the correct removal procedure of hose assemblies (4).
- Remove clips (1) and (5). Disconnect harness assemblies (2). Remove hose assemblies (4) and hoses (3).
Show/hide table
Illustration 2 g03365463 - Remove cable straps (6) and disconnect harness assembly (7).
Show/hide table
Illustration 3 g03365465 - Remove bolts (8), plate (9), manifold (10), and the gasket (not shown).
Show/hide table
Illustration 4 g03365468 - Remove bolts (11).
Show/hide table
Illustration 5 g03365475 - Remove bolt (12).
Show/hide table
Illustration 6 g03365477 - Remove bolts (13) and pump assembly (14).
Show/hide table
Illustration 7 g03365493 - Remove bolts (15) and bracket (16) from the tank .
Show/hide table
Illustration 8 g03365514 - Remove bolt (18) and cap (17). Remove bolts (19) and manifold (20).
Show/hide table
Illustration 9 g03365521 - Remove O-ring seals (23) from cap (21). Remove plug (24) and plug (25) from manifold (21).
Show/hide table
Illustration 10 g03365528 - Disconnect harness assembly (26) and remove solenoid assembly (27).
Show/hide table
Illustration 11 g03365540 - Remove relays (28).
Show/hide table
Illustration 12 g03365547 - Remove bolts (29). Remove control module (30).
Show/hide table
Illustration 13 g03365554 - Disconnect harness assembly (33). Remove cable straps (32). Remove electronic control (31).
Show/hide table
Illustration 14 g03383608 - Remove cover (34).
Show/hide table
Illustration 15 g03383609 - Remove expansion device (35).
Show/hide table
Illustration 16 g03383610 - Remove filter (36).
Show/hide table
Illustration 17 g03366015 - Remove cable straps (38), bolts (39), and bracket (37).
Show/hide table
Illustration 18 g03366035 - Disconnect harness assembly (40).
Show/hide table
Illustration 19 g03366046 - Remove bolts (41). Separate support assembly (42) from pump (43).
Show/hide table
Illustration 20 g03366053 - Remove cable straps (45) and harness assembly (44).
Show/hide table
Illustration 21 g03366057 Note: Place identification marks on fittings (46) for installation purposes. Fittings (46) are not interchangeable.
- Remove fittings (46) and the O-ring seals.
Show/hide table
Illustration 22 g03383611 - Remove bracket (47). Remove hose assembly (48).
Show/hide table
Illustration 23 g03383612 - Remove nuts (52). Remove straps (51). Remove tank (48) from support assembly (50).
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |