Bucket Linkage
Show/hide table
Illustration 1 | g03893063 |
Show/hide table
Specification for 457-2531 Bucket Linkage Gp | |||
Item | Qty | Part | Specification Description |
Coat all bores for pins with 5P-0960 Grease Cartridge. | |||
During assembly of the linkage group on machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick. | |||
1 | 4 | 093-1432 Lip Type Seal | Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss. |
2 | 1 | 319-3653 Pin | Diameter is |
3 | 1 | 8T-4244 Nut | Position the nut (4) to the distance of Torque to |
4 | 1 | 8T-4244 Nut | |
5 | As required, use shims in order to adjust the lateral clearance to a maximum of |
||
4 | 433-3898 Shim | Thickness is |
|
2 | 167-9888 Shim | Thickness is |
|
6 | As required, use shims in order to adjust the lateral clearance to a maximum of |
||
4 | 433-3930 Shim | Thickness is |
|
7 | 1 | 319-3654 Pin | Diameter is |
8 | 2 | 296-9481 Pin | Diameter is |
9 | 2 | 296-9578 Lip Type Seal | Install the dust seal so that the lip faces outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss. |
10 | 2 | 296-9438 Bushing | Bore before assembly is Installation depth is |
Caterpillar Information System:
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Radiator and Hydraulic Oil Cooler
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Lines
C3.3B and C3.8 Engines for Caterpillar Built Machines Injector Solenoid - Test - Fuel Injector
C3.3B and C3.8 Engines for Caterpillar Built Machines Injector Data Incorrect - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines NOx Sensor - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines Solenoid Valve - Test - Solenoid Valves that Connect to the Dosing Control Unit (DCU)
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Pump - Test
EMCP 4.4 Supervisory Control Panel Logged Events
EMCP 4.4 Supervisory Control Panel Failsafe Operation
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Starting Aid - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Solenoid Valve - Test - Suction Control Valve
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Sensor Supply - Test
C7.1 Engines Cooling Fan Control - Test - Viscous Clutch Fan
794 AC Off-Highway Truck Machine Systems Solenoid Valve and Manifold (Blower Fan, Final Drive Lubrication, Steering) - Remove and Install
794 AC Off-Highway Truck Machine Systems Solenoid and Manifold Valve (Steering) - Remove and Install
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Relief Valve (Pilot)
Improvements to the Main Hydraulic Pump are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5070} Improvements to the Main Hydraulic Pump are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5070}
794 AC Off-Highway Truck Machine Systems Steering Control Valve - Remove and Install
SRMP Electric Power Generation SRMP Generator Coupling - Remove and Install
3516E Generator Set Engine Electronic Control Module (ECM)
349F and 352F Excavators Selective Catalytic Reduction Warning System
3516E Generator Set Engine Fuel Pressure
C3.3B and C3.8 Engines for Caterpillar Built Machines NOx Conversion Is Low
G3606 and G3608 Engines Fuel Shutoff Solenoid - Remove and Install