Piston Cooling Jets - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1), cover (2), and the gasket.
Show/hide table
Illustration 2 g03854293 Typical example. - Remove bolts (3), retainer assembly (4), and oil jet tube assembly (5).
Show/hide table
| |
| Illustration 1 | g03854281 |
|
Typical example. | |
- Install the piston cooling jets in the reverse order of removal.
Caterpillar Information System:
G3600 A4 Engines Hoses and Clamps - Inspect/Replace
G3600 A4 Engines Electrohydraulic Actuator - Inspect
3516E Engines Engine Oil Sequence Valves - Remove and Install
G3606 and G3608 Engines Priority Valve - Remove and Install
2015/06/26 A New Exhaust Shield Is Now Used for Certain G3500B Engines G3500B Engines {1067}
G3606 and G3608 Engines Engine Oil Filter Housings - Install
CG137-08 and CG137-12 Engines Maintenance Interval Schedule
G3606 and G3608 Engines Engine Oil Filter Housings - Remove
G3516 Petroleum Engine Engine Crankcase Breather - Clean
G3516 Petroleum Engine Engine Air Cleaner Service Indicator - Inspect
G3606 and G3608 Engines Engine Oil Filter Elements - Remove and Install
120 and 120 AWD Motor Grader Transmission and Differential Oil Sample - Obtain
C8.7 Marine Engine Pistons and Connecting Rods - Disassemble
C8.7 Marine Engine Rocker Arm and Shaft - Remove and Install
3512C Generator Set Engine Pistons and Connecting Rods - Install
C13 Tier 4 Final Commercial and Machine Engines with an E360 (3) Low Engine Oil Pressure Code{1304} C13 Tier 4 Final Commercial and Machine Engines with an E360 (3) Low Engine Oil Pressure Code{1304}
3512C Generator Set Engine Camshaft - Remove
C8.7 Marine Engine Valve Mechanism Cover - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Coolant Level Is Low
2015/06/26 New Software Is Used on Certain G3516C Engines {1901, 1920}
797F Off-Highway Truck Field Assembly Hydraulic Tank Guard - Install
2015/09/11 A New Water Tube Is Now Used on Certain C18 Engines {1379, 1380}
Procedure For Replacing The Engine Interface Box Harness On Certain G3500B Engines{4460, 7426} Procedure For Replacing The Engine Interface Box Harness On Certain G3500B Engines{4460, 7426}
G3606 and G3608 Engines Vibration Damper - Remove