Lifting and Tying Down the Machine - Fixed Conveyor
Show/hide table
不當的起吊或繫緊會讓負載移位,而造成人員受傷或機器損壞。 |
Show/hide table
插圖 1 | g03835612 |
若欲了解機器的基本技術規格,請參閱操作與保養手冊, "技術規格"。
各種作業機具的基本技術規格,請參閱該作業機具的操作及維護手冊。
Show/hide table
起吊重量 - 起吊重量表示機器無配備任何作業機具時的最大重量。 |
Show/hide table
起吊點 - 若要將機器吊起,請將起重裝置連接至起吊點。 |
Show/hide table
栓繫點 - 若要將機器綁起,請將綑綁帶連接至栓繫點。 |
Show/hide table
插圖 2 | g03835594 |
採用正確額定的纜繩和吊索起吊機器。
定位起重機或起重裝置,以將機器起吊至水平位置。
- 將機器就定位。
- 將推進操縱桿移至 NEUTRAL (空檔) 位置,並確定駐車煞車指示器已亮起。
附註當機器停止並且推進操縱桿處於 NEUTRAL (空檔) 位置時,駐車煞車會自動啟動。
- 將引擎起動開關鑰匙調至 OFF(關閉)位置。 取下鑰匙。
- 將吊升帶連接至吊耳。 吊耳可經由機器上的標示辨識。 機器兩側各有兩個起吊環。
- 將機器慢慢吊起,確保機器保持水平。 將機器移至想要的位置。
Show/hide table
插圖 3 | g03835624 |
- 將機器就定位。
- 將進料器降下,直到進料器置於進料器兩側的進料器支柱上。
- 將推進操縱桿移至 NEUTRAL (空檔) 位置,並確定駐車煞車指示器已亮起。
附註當機器停止並且推進操縱桿處於 NEUTRAL (空檔) 位置時,駐車煞車會自動啟動。
- 將引擎起動開關鑰匙調至 OFF(關閉)位置。 取下鑰匙。
- 抵住履帶。
- 以捆綁位置將機器固定好。 可從機器的標示上識別捆綁位置。 機器兩側各有兩個捆綁位置。
- 使用進料器兩側的捆綁位置,將進料器捆紮固定。
運送說明請參閱操作及保養手冊機器, "運送"。
Caterpillar Information System:
3600 Distillate Fuel Engines Maintenance Interval Schedule
C9.3 Marine Engine Valve Mechanism Cover - Remove and Install
C9.3 Marine Engine Cylinder Block Cover - Remove and Install
3500 Engines Housing (Front)
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
3406E Engine Cylinder Head - Install
The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269} The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269}
C27 and C32 Engine for MD6250 and MD6310 Drill Coolant Level - Test
XQC1200 and XQC1600 Power Modules Circuit Breaker Panel - Remove and Install
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122} 442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
C11, C13, C15, and C18 Industrial Engines NRS Exhaust Gas Temperature Is High
C9.3 Marine Engine Front Cover - Remove and Install
C9.3 Marine Engine Cylinder Head - Remove and Install
3500B High Displacement Locomotive Engines Fuel Injector Mechanism
12M Motor Grader Wheel Lean Bearings - Lubricate
2015/07/07 An Improved Housing for the Throttle Inlet Is Used on Certain G3500 Engines {1071}
3500 Generator Sets with Dynamic Gas Blending Generator Bearing - Inspect
2015/08/14 A New Control Valve Assembly for Fuel Is Used on Certain 3500 Marine Engines {1261}
3500 Generator Sets with Dynamic Gas Blending Generator Bearing - Replace
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Right-Hand Service
C280-08 Tier 4 Engine Exhaust Manifold Shield - Remove and Install
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Combined Circuit Keel Cooling
3516B Generator Set Engines with Dynamic Gas Blending Exhaust System Contains Oil
C9.3 Marine Engine Engine Oil Pan - Remove and Install - Left-Hand Service Oil