Refill Capacities
The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require more oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.
Show/hide table
| Approximate Refill Capacity for the 3512E Engine Lubrication System | ||
|---|---|---|
| Compartment or System | Capacities | |
| Standard sump | |
|
| Deep sump | |
|
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity can include the following components: engine, expansion tank, heat exchanger, radiator, and piping.
Refer to the specifications that are provided by Caterpillar or the OEM of the installation. Record the total cooling system capacity in the appropriate Table.
Show/hide table
| Approximate Refill Capacities for the 3512E Engine Cooling System | ||
|---|---|---|
| Compartment or System | Liters | US Gallons |
| Jacket water system | 197 | 51 |
| Separate circuit aftercooler (SCAC) | 53 | 14 |
| External system | ||
| Total cooling system | ||
Caterpillar Information System:
3512E HD Petroleum Engine Manual Stop Procedure
3512E HD Petroleum Engine Emergency Stopping
3512E HD Petroleum Engine Fuel Conservation Practices
3512E HD Petroleum Engine Engine Operation
C4.4 Marine Generator Set Pressure Sensor (Sea Water) - Remove and Install - Auxiliary Water Pump Pressure Sensor
C4.4 Marine Generator Set Fuel Cooler - Remove and Install
C4.4 Marine Generator Set Temperature Sensor (Exhaust) - Remove and Install
C4.4 Marine Generator Set Exhaust Elbow - Remove and Install
3512E HD Petroleum Engine After Starting Engine
3512E HD Petroleum Engine Cold Weather Starting
2014/09/05 Cat® Reman Now Offers Valve Lifter Assemblies for Certain Truck Engines {1209}
3512E Land Electric Drive Configuration Parameters
C280 Marine Engines ECM Software - Install
3512E HD Petroleum Engine Fluid Recommendations
3516B Generator Set Engines with Dynamic Gas Blending Injector Trim File - Install
C280 Marine Engines ECM Will Not Accept Factory Passwords
C175-16 PETROLEUM ENGINES Pressure Sensor (Air Inlet Manifold) - Remove and Install
Updating the 350-3013 Engine Harness As Connector Used on 3512C Petroleum Well Fracturing Engines{1408, 7553} Updating the 350-3013 Engine Harness As Connector Used on 3512C Petroleum Well Fracturing Engines{1408, 7553}
3512E HD Petroleum Engine Overhaul (Major)
3512E HD Petroleum Engine Starting Motor - Inspect
2014/10/31 A New Improved Oil Filter Housing Cover Is Used on Certain C175-16 Engines {1306}
XQC1200 Power Module Safety Messages
2014/09/05 A New Method Is Available to Update Some Color Marine Power Displays with the Correct Device ID on Certain Engines {1900, 7400, 7402, 7450, 7451, 7490}
C175-16 PETROLEUM ENGINES Pressure Sensor (Coolant, Block Inlet) - Remove and Install