455-7247 Major Overhaul Foundational Kit for C18Marine Engines{1000} Caterpillar


455-7247 Major Overhaul Foundational Kit for C18Marine Engines{1000}

Usage:

C18 JKX
Marine Engine:
C18 MARINE (S/N: JKX1-UP)

Introduction

This Special Instruction is intended to provide information on the Engine Overhaul Kit Consist and detailed information on specific parts that should be used based on engine arrangements.

This Engine Overhaul Kit may contain extra parts and extra quantities due to the variety of engine arrangements assigned to a given kit. Refer to the corresponding Parts Manual or Disassembly and Assembly manual in Table 1.

Note: This Kit may contain upgraded parts. These upgraded part numbers may be different than what you have in the parts manual or engine, but these parts have been technically reviewed for compatibility with your application.

Note: This kit contains gasket kits and includes additional parts needed to perform an engine overhaul.

Note: This kit does not contain rod bearings, main bearings, and thrust plates.

Note: For more information, visit us at: catmarinesupport.com.

Note: For assistance with technical questions, contact your local Cat dealer.

Reference Material

Table 1
Engine Model     Engine Arrangements     Engine Serial Number Prefix     Parts Book Media     Disassembly and Assembly Media    
C18
   
338-1512
314-2815    
S/N:JKX     SEBP4774     RENR2389    

Note: For ordering reference material, contact your local Cat dealer.

C18 455-7247 Major Overhaul Kit Consist

Table 2
455-7247 Major Overhaul Kit Consist    
Gasket Kits    
Part Number     Part Name     Qty    
417-9667     Rear Structure     1    
453-2313     Heat Exchanger Gasket Kit     1    
455-1190     Oil Cooler and Lines Gasket Kit     1    
455-1197     Central and Lower Structure     1    
455-7252     After Cooler and Lines Gasket Kit     1    
456-0009     Single Cylinder Head Gasket Kit     1    
Additional Parts Included in This Kit    
Part Number     Part Name     Qty    
1P-0436     Gasket     1    
1R-0749     Fuel Filter     1    
2N-2766     Locknut     12    
3K-0360     O-Ring Seal     2    
4K-1388     O-Ring Seal     1    
4N-8150     Spring     3.    
5M-3038     O-Ring Seal     2    
6L-2280     Zinc Rod     3    
6V-6923     Backup Ring     1    
8T-9527     O-Ring Seal     1    
033-6033     O-Ring Seal     1    
106-1792     Taperlock Stud     12    
107-5769     O-Ring Seal     2    
109-0072     O-Ring Seal     1    
109-0077     O-Ring Seal     1    
122-3772     O-Ring Seal     1    
126-1757     Washer     9    
129-5427     Special Washer     2    
142-5867     Crankshaft Seal     1    
144-6142     Integral Seal     1    
155-9524     Integral Seal     1    
166-9144     Gasket     1    
214-7566     O-Ring Seal     1    
214-7568     O-Ring Seal     6    
228-4947     O-Ring Seal     2    
228-7090     O-Ring Seal     1    
238-5081     O-Ring Seal     2    
248-5513     Temperature Regulator     1    
249-2347     Engine Oil Filter Element As     2    
274-7913     Air Filter Element As     1    
297-1813     Head Screw     12    
392-9208     Valve Plunger     3    

C18 Engine Gasket Kit Locations




Illustration 1g03700397

(1) Single Cylinder Head ( 456-0009 Gasket Kit )

(2) Aftercooler and Lines Kit ( 455-7252 Gasket Kit )

(3) Heat Exchanger ( 453-2313 Gasket Kit )

(4) Central and Lower Structure ( 455-1197 Gasket Kit )

(5) Oil Cooler and Lines ( 455-1190 Gasket Kit )

(6) Rear Structure ( 417-9667 Gasket Kit )

Gasket Kit Consists

Rear Structure (417-9667 Gasket Kit)

Table 3
417-9667 Gasket Kit (Rear Structure)    
Part Number     Gasket Kit     Qty    
2A-1162     Gasket     1    
5P-7530     O-Ring Seal     1    
9Y-6089     Gasket     2    
114-2687     O-Ring Seal     1    
142-5868     Crankshaft Seal     1    
230-3728     O-Ring Seal     1    
234-8937     Integral Seal     1    
250-0466     O-Ring Seal     1    
268-5582     Seal     1    
268-5589     Seal     1    

Refer to Illustration 1.

Heat Exchanger (453-2313 Gasket Kit)

Table 4
453-2313 Gasket Kit (Heat Exchanger)    
Part Number     Part Name     Qty    
3K-0360     O-Ring Seal     2    
3S-9643     Lip Type Seal     1    
6V-9027     O-Ring Seal     2    
8C-3073     O-Ring Seal     1    
204-7844     O-Ring Seal     1    

Refer to Illustration 1.

Oil Cooler and Lines (455-1190 Gasket Kit)

Table 5
455-1190 Gasket Kit (Oil Cooler and Lines)    
Part Number     Part Name     Qty    
3D-2824     O-Ring Seal     3    
3K-0360     O-Ring Seal     1    
5K-9090     O-Ring Seal     1    
7M-8485     O-Ring Seal     1    
8C-3445     Dust Cap     1    
8C-5230     O-Ring Seal     4    
8L-2786     O-Ring Seal     1    
109-0077     O-Ring Seal     3    
114-4427     O-Ring Seal     1    
125-0434     Integral Seal     1    
126-4935     Integral Seal     1    
167-4407     O-Ring Seal     1    
214-7566     O-Ring Seal     1    
214-7568     O-Ring Seal     2    
238-5084     O-Ring Seal     2    

Refer to Illustration 1.

Central and Lower Structure (455-1197 Gasket Kit)

Table 6
455-1197 Gasket Kit (Central and Lower Structure)    
Part Number     Part Name     Qty    
3D-2824     O-Ring Seal     1    
4N-0699     Gasket     4    
5K-9090     O-Ring Seal     1    
5P-5846     O-Ring Seal     1    
5P-8068     O-Ring Seal     1    
6V-3683     O-Ring Seal     1    
6V-5048     O-Ring Seal     4    
6V-6609     O-Ring Seal     3    
8C-0624     O-Ring Seal     1    
8J-4351     O-Ring Seal     1    
8L-2786     O-Ring Seal     1    
061-9458     O-Ring Seal     1    
112-3102     O-Ring Seal     1    
114-2687     O-Ring Seal     1    
114-4427     O-Ring Seal     2    
118-5068     O-Ring Seal     1    
126-4935     Integral Seal     1    
136-7227     O-Ring Seal     1    
157-0670     Dust Cap     2    
165-6170     Plug     4    
214-7566     O-Ring Seal     6    
214-7568     O-Ring Seal     2    
238-5080     O-Ring Seal     6    
345-0412     Gasket     2    

Refer to Illustration1.

Aftercooler and Lines (455-7252 Gasket Kit)

Table 7
455-7252 Gasket Kit (Aftercooler and Lines)    
Part Number     Part Name     Qty    
1J-9671     O-Ring Seal     2    
2M-9780     O-Ring Seal     1    
3K-0360     O-Ring Seal     1    
6V-4365     O-Ring Seal     4    
6V-5166     O-Ring Seal     2    
7D-7111     O-Ring Seal     1    
9S-4185     O-Ring Plug     1    
109-7411     O-Ring Seal     1    
238-5080     O-Ring Seal     1    
238-5081     O-Ring Seal     1    
319-7525     Seal     1    

Refer to Illustration 1.

Single Cylinder Head (456-0009 Gasket Kit)

Table 8
456-0009 Gasket Kit (Single Cylinder Head)    
Part Number     Part Name     Qty    
2M-9780     O-Ring Seal     4    
2N-2766     Locknut     8    
3E-6772     Seal     24    
5E-8771     O-Ring Seal     1    
5P-0840     O-Ring Seal     2    
5P-7530     O-Ring Seal     2    
6I-2517     Gasket     1    
6J-2245     O-Ring Seal     2    
6L-8562     Taperlock Stud     8    
6V-0128     Connector Seal     1    
6V-1197     O-Ring Seal     1    
6V-3917     O-Ring Seal     4    
6V-4367     O-Ring Seal     1    
6V-5048     O-Ring Seal     2    
6V-6609     O-Ring Seal     1    
7M-7273     Gasket     2    
7M-8485     O-Ring Seal     1    
8L-2746     O-Ring Seal     2    
109-0072     O-Ring Seal     1    
109-0073     O-Ring Seal     1    
114-2687     O-Ring Seal     1    
117-8801     O-Ring Seal     1    
129-9452     Exhaust Manifold Gasket     6    
142-2329     Seal     1    
149-7378     Grommet     18    
160-7271     Seal     1    
214-7566     O-Ring Seal     5    
214-7568     O-Ring Seal     10    
227-1204     Gasket     1    
228-7090     O-Ring Seal     5    
238-5078     O-Ring Seal     2    
238-5080     O-Ring Seal     4    
238-5081     O-Ring Seal     2    
242-9537     Valve Cover Seal     3    
272-0390     Seal     1    
359-0908     Cylinder Head Gasket     1    

Refer to Illustration 1.

Caterpillar Information System:

2014/07/07 New Software Is Used on Certain G3520C Generator Set Engines {1901, 1920}
C3.4B Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C3.4B Engines for Caterpillar Built Machines Clean Emissions Module
C3.4B Engines for Caterpillar Built Machines Fuel Injection
C3.4B Engines for Caterpillar Built Machines Cooling System
3512E HD Petroleum Engine Maintenance Recommendations
C8.7 Marine Engines Cylinder Liner Projection - Inspect
C8.7 Marine Engines Air Inlet and Exhaust System - Inspect
2014/07/18 A Remanufactured Oil Cooler Is Available for Certain Truck Engines {1375, 1378}
2014/07/18 A Remanufactured Oil Cooler Is Available for Certain Commercial Engines {1375, 1378}
2014/07/11 Improved Crankshaft Rear Seals Are Used On Certain C9 Engines {1161, 7555}
349F and 352F Excavators Engine and Machine Warm-Up
455-7378 Major Overhaul Foundational Kit for C18 Marine Engines{1000} 455-7378 Major Overhaul Foundational Kit for C18 Marine Engines{1000}
C9 Generator Set Refill Capacities
C9 Generator Set Product Installation
3306B-XQ200 Rental Generator Set Engine Safety Messages
C9 Generator Set Product Lifting
C9 Generator Set Coolant (ELC) - Change
C13 Engine for Combat and Tactical Vehicles Engine Valve Lash - Inspect/Adjust
2014/07/07 A New Digital Return Pinout Is Used on the Wiring Harness of Certain G3500 Engines {1408}
C13 and C15 On-highway Engines ARD Combustion Air - Test
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Intake Manifold Air Temperature Is High
2014/10/10 A New Expansion Tank Assembly Is Available as a Service Replacement for Certain 3500 Marine Engines {1354}
2015/03/13 Flushing the Cooling System Before the First Coolant Fill on C8.7 Marine Engines {1350}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.