Refill Capacities
润滑剂容量
发动机润滑系统的容量包括工厂安装的机油滤清器的容量。 辅助机油滤清器系统（如有配备）需要额外的机油。 参考由辅助机油滤清器系统 OEM 提供的技术规格。
Show/hide table
| C175-16 加注容量 | |
| 带机油滤清器更换 | 530 L (140 US gal) |
| 不带机油滤清器更换 | 499.6 L (132 US gal) |
| 工厂加注 | 598 L158 ( US gal) |
| 容量在发动机机油油位表（油尺）的 "ADD"（加）标记和 "FULL"（满）标记 之间。 | 94.6 L (25 US gal) |
Show/hide table
| C175-20 加注容量 | |
| 带机油滤清器更换 | 681 L (180 US gal) |
| 不带机油滤清器更换 | 662.4 L (175 US gal) |
| 工厂加注 | 757 L (200 US gal) |
| 容量在发动机机油油位表（油尺）的 "ADD"（加）标记和 "FULL"（满）标记 之间。 | 94.6 L (25 US gal) |
燃油喷油泵（湿油底壳泵）
Show/hide table
| 燃油喷油泵 | 900 mL (30.6 oz) |
冷却液容量
为了正确保养冷却系统，必须确定冷却系统总容量。 冷却系统的总容量将随安装的设备不同而变化。 冷却系统的总容量可包括以下部件：发动机, 散热器, 散热器 和 管路。
参考由 Caterpillar或安装设备的原始设备制造商（OEM）提供的规范。 在下列表格中记录冷却系统的总容量。
Show/hide table
| C175-16 加注容量 | |
| 散热器 | 容量 |
| 64 SF 垂直安装 | 1025 L (271 US gal) |
| 84 SF 垂直安装 | 1138 L (301 US gal) |
| 水平远程安装 | 1167 L (308 US gal) (1) |
Show/hide table
| ( 1 ) | 该容量仅包括发动机和散热器。 实际容量随安装不同而变化。 |
Show/hide table
| C175-20 带垂直散热器的发电机组 | ||
| 部件 | 冷却系统 | 容量 |
| 发动机 | 水套水 | 380 L (100.4 US gal) |
| SCAC | 75 L (20 US gal) |
|
| 散热器 | 水套水 | 443 L (117 美制加仑) |
| SCAC | 300 L (79 US gal) |
|
| 管路 | 水套水 | 37 L (10 US gal) |
| SCAC | 39 L (10.3 US gal) |
|
| 总计 | 水套水 | 860 L (227 US gal) |
| SCAC | 414 L (109.3 US gal) |
|
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - Cast Iron Oil Pan
C4.4 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - Aluminum and Pressed Steel Oil Pans
C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C4.4 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
XQC1200 and XQC1600 Power Modules Aftercooler - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
C4.4 Engines for Caterpillar Built Machines Fan Drive - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan - Remove and Install
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
793F and 797F Off-Highway Trucks Braking System E652 Low Service Brake Accumulator Pressure
C4.4 Engines for Caterpillar Built Machines Crankcase Breather - Remove - Unfiltered Breather
G3500 Generator Sets Maintenance Interval Schedule - Prime
G3500 Generator Sets Maintenance Interval Schedule - Standby
3516B Generator Set Engines with Dynamic Gas Blending Engine Overspeeds
UPS 750 Uninterruptible Power Supply Bypass Static Switch
UPS 750 Uninterruptible Power Supply Line Static Switch
UPS 750 Uninterruptible Power Supply Customer Interface Board
C8.7 Marine Engines Turbocharger - Inspect
UPS 750 Uninterruptible Power Supply Power Supply
UPS 750 Uninterruptible Power Supply Power Distribution PWA
UPS 750 Uninterruptible Power Supply Voltage Current Interface