C3.3B Engines for Caterpillar Built Machines Caterpillar


Finding Top Center Position for No. 4 Piston

Usage:

910K AY4

------ WARNING! ------

Do not open the high pressure fuel system without allowing the fuel system to purge. After the engine has shut down, allow the fuel system to purge for ten minutes. This operating fuel system contains high pressure. Exposure to high pressure fuel can result in personal injury.




    Illustration 1g03655634
    (1) Window cover
    (2) Flywheel housing

  1. Remove window cover (1) from flywheel housing (2).

  2. Rotate the flywheel counterclockwise and align the TDC mark on the gear with the TDC mark on the flywheel.


    Illustration 2g06372608
    (3) Idle gear timing mark
    (4) Idle gear
    (5) Fuel supply pump gear
    (6) Fuel supply pump gear timing mark

  3. If the fuel supply pump gear timing mark (6) meshes with the idle gear timing mark (3), piston number four is at TDC. If the timing marks do not mesh, rotate the flywheel counterclockwise one revolution and recheck the timing marks.

Caterpillar Information System:

2014/04/04 Recommendations for Intermittent Facility Power to Dosing Cabinets {108H, 1408}
Retrofit SCR Aftertreatment Filter Screen (DEF) - Clean/Replace
390F Excavator Machine Systems Main Control Valve - Disassemble - Bucket and Boom
390F Excavator Machine Systems Main Control Valve - Assemble - Bucket and Boom
C9.3 Marine Auxiliary Engines Model View Illustrations
2014/04/04 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
Installation of the 419-0893 Solenoid Valve Gp for Certain G3500 Petroleum Engines{1274, 5479} Installation of the 419-0893 Solenoid Valve Gp for Certain G3500 Petroleum Engines{1274, 5479}
390F Excavator Machine System Swing Motor Lines
390F Excavator Machine System Fuel Filter Lines
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C9.3 Tier 4 Final Engines Turbocharger
3512C HD and 3516C HD IPP Rental Power Modules Sensor Signal (Analog, Passive) - Test
794 AC Off-Highway Truck Fan - Inspect
390F Excavator Machine System Flood Lamp
390F Excavator Machine System Pilot Lines
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Pilot Lines
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Pilot Lines
C4.4 Marine Generator Set Reference Material
390F Excavator Machine System Position Sensor and Mounting
390F Excavator Machine Systems Main Control Valve - Disassemble - Swing
390F Excavator Machine System Communication Electronic Control Module (Product Link)
Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks, Leaks, and Recovery from Engine Oil Contamination for C6.6 and C4.4 Engines{108F}
390F Excavator Machine Systems Main Control Valve - Assemble - Swing
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.