Breather (Transmission) - Clean
Show/hide table
Illustration 1 | g03448007 |
Typical example of a CX31 On-Highway Transmission (1) Breather |
Note: Inspect the breather within 3 to 4 days. If air conditions are dirty, then inspect the breather daily.
- Remove the breather.
- Wash the breather in a clean, nonflammable solvent. Allow the breather cap to air dry.
- Install the breather.
Caterpillar Information System:
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Level - Check
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095} 188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Diagnostic Trouble Codes
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
2013/10/11 New Side Cover and Oil Drain System Are Used on Certain 3512C Locomotive Engines {1307}
C4.4 Industrial Engine Safety Messages
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Sample - Obtain
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
2013/10/29 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain On-Highway Truck Engines {1250, 1251, 1290, 1713}
2013/10/17 Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
C175-16 Locomotive Engines Engine Crankcase Breather - Clean
C9 Marine Engines and C9 Marine Generator Sets Air Starting Motor - Remove and Install
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700} Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
2013/10/02 Improved Gear Train Components are Now Used on TH48-E80 Petroleum Transmissions {3064, 3160}
CX31-P600 Petroleum Transmission Power Train Hydraulic System
Three60 Precision Control System System Overview
C15 and C18 Engines for Caterpillar Built Machines General Information
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057} Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
CX31 and CX31 HT On-Highway Transmissions Transmission Control
CX31 and CX31 HT On-Highway Transmissions Transmission Operation
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703} 188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
G3306B Gas Engines Alternator Mounting
349F and 352F Excavators Machine System Specifications Track Carrier Roller