1993/09/01 Caterpillar


Additional Parts Required For Remanufactured Short Block

Usage:


3406 (92U) Engines

Description of Change: Additional parts are required when using the 0R0715 Short Block.

Adaptable To:

Additional parts are required on 3406 Truck Engines (92U1-5943).

These early engines provided the oil supply for the rocker arms through the head bolt holes while later engines and the 0R0715 Short Block have separate oil supply passages for the rocker arms.

The additional parts required are: head gasket, cylinder head and rocker arm brackets.

Caterpillar Information System:

1993/09/01 Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure
1993/09/01 New Cylinder Liner And Seal
1993/09/01 Spacer Block Reusability Guideline
1993/09/01 New Bonnet And Insert Used In Fuel Injection Pump Group; New Fuel Lines Groups Used
1993/08/01 List Of Service Publications
1993/08/01 Camshaft Idler Gear Shaft/Bolts
1993/08/01 Damper Requirements For Remanufactured Short Block
1993/08/01 Turbocharger Options For High Horsepower Applications
1993/08/01 Update Kit Available For Jake Brake® Models C317/C317A Engine Brakes
1993/08/01 New Fuel Injector Control Linkage
1993/07/01 Battery Acid Fill Machine May Be Damaging Batteries
1993/07/01 Compressor Nut Torque For Schwitzer Turbochargers
1993/09/01 Low Sulfur Fuel (USA Low Emission Engine Operation; Low Sulfur Fuel Outside The USA)
1993/10/01 New Cylinder Head, Spacer Block, And Head Gasket Available
1993/10/01 New Freon Compressor Mounting Bracket Used
1993/10/01 Longer Bolts Required With New Spacer Block
1993/10/01 Camshaft Drive Gear Inspection
1993/10/01 Fuel Consumption Versus Ambient Temperature
1993/11/01 On Highway Dynamic Engine Response Test
1993/11/01 Low Power Complaints Caused By 9X7793 Rack Sensor Non-Linearity On Electronic Engines
1993/11/01 New Dynamic Fuel Ratio Control (FRC) Settings Provide Improved Engine Response
1993/11/01 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/12/01 New Control Assemblies Used In Fuel Injection Control Groups{1298}
1993/12/01 Replacement Of Earlier Truck Engines In General Motors Topkick And Kodiak Trucks{1000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.