C18 Generator Set Caterpillar


Safety Messages

Usage:

C18 I6 NAW
在发电机组上可能有几处特定的警告标志。 本部分回顾这些安全标志的确切位置和描述。 请熟悉所有的安全标志。

请确保所有的安全标志都很清晰易读。 如果安全标志的说明文字或插图无法辨识,请清洁或更换。 用布、水和肥皂来清洁这些安全标志。 不要使用溶剂、汽油和其它刺激性化学制品。 这些溶剂、汽油或腐蚀性化学制品,可能会使固定安全标志用的粘着剂丧失粘性。 松动的安全标志可能会从发动机上脱落下来。

更换任何损坏或丢失的安全标志。 如果有安全标志贴在了被更换的零件上,应在更换零件上粘贴新的安全标志。 您的 Caterpillar 代理商可以提供新的安全标志。

------ WARNING! ------

电力反馈到公用电配电系统可能会导致财产损失,以及严重伤害或死亡。 不要将发电机连接到用于隔离建筑物与公用电力系统的建筑物主开关。 对于永久性安装,连接应仅为双掷开关,以将建筑物与公用电力系统隔离。 请咨询合格的技师,以确保正确使用和安装。 遵守所有适用法律和电气规范。




图 1g03459937
发电机组罩壳左侧视图


图 2g03458117
罩壳右侧视图


图 3g03466737
敞开式发电机组左侧视图


图 4g03466736
敞开式发电机组右侧视图

普适警告(1)

该安全标志位于罩壳侧面和控制面板罩壳上。



图 5g01370904

------ WARNING! ------

在阅读和了解⟪操作和保养手册⟫中的指示和警告之前,请勿操作机器。 不遵守这些警告,可能会导致人身伤亡。


自动起动(2)

该安全标志位于罩壳侧面上和控制面板罩壳上。



图 6g01392484

------ WARNING! ------

发动机在“自动(AUTOMATIC)”模式时,发动机能在任何时候起动。 为了避免造成人身伤害,当发动机在“自动(AUTOMATIC)”模式时,一定要与发动机保持距离。


热表面 (3)

该安全标志位于罩壳顶部和侧面,以及排气管附近、后冷器上和发电机上。



图 7g01384734

------ WARNING! ------

灼热的零件或部件会烫伤人体。 别让灼热的零件或部件触及您的皮肤。 为了保护您的皮肤,必须穿上保护衣或使用保护装备。


电击(4)

电击安全标志位于控制面板罩壳上。



图 8g01372247

------ WARNING! ------

警告! 电击/触电危险! 请阅读和了解操作和保养手册中的指示和警告。 不按规程操作会造成人身伤亡。


触电死亡 (5)

该安全标志位于发电机的顶部和侧面以及断路器罩壳上。



图 9g01392482

------ DANGER! ------

危险: 电击/触电死亡危险-除非您已阅读和理解了操作和保养手册中的说明和警告,否则不要操作本设备或在本设备上进行维修保养工作。 不按照说明去做或不理会警告都将会导致严重伤害或死亡。


挤压 (6)

该安全标志位于封闭式发电机组侧面上。 该安全标志还位于敞开式发电机组的基座上。



图 10g01433231

------ WARNING! ------

挤压危险! 请阅读和了解⟪操作和保养手册⟫中的指示和警告。 不按照说明去做或不理会警告都将会导致严重伤害或死亡。


Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C7.1 Industrial Engine Electrical System
C7.1 Marine Generator Set Starting with Jump Start Cables
C7.1 Marine Generator Set Starting the Engine
C13 and C15 Generator Sets Plate Locations and Film Locations
C15 and C18 Engines for Caterpillar Built Machines Inlet Module (Catalyst) - Remove and Install
2014/06/20 J1939 Suspect Parameter Numbers for G3300B and CG137 Engines {1900, 1901, 1920}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install
C13 and C15 Generator Sets Product Installation
3512C Petroleum Engines with Dynamic Gas Blending Engine Control Switch - Test
2013/07/01 New Flywheel Housing Assemblies and Gaskets Are Used on Certain 3500 Locomotives Engines {1157, 7555}
C7.1 Marine Generator Set Engine Operation
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C7.1 Marine Generator Set Generator Operation
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
2013/06/13 New Fuel Lines Are Available on Certain C18 Marine Engines {1274}
C15 and C18 Engines for Caterpillar Built Machines Power Take-Off Drive Group - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.