Component Location
Block Diagrams of the Engine Sensors
Block Diagram of the R1A Engine
Show/hide table
Illustration 1 | g03381245 |
Show/hide table
Illustration 2 | g03390157 |
Block Diagram of the R1S Engine
Show/hide table
Illustration 3 | g03387783 |
Show/hide table
Illustration 4 | g03381243 |
Location of the Engine Sensors
Location of the R1A Engine Sensors
Show/hide table
Illustration 5 | g03387779 |
Typical left-hand side view (1) Air shutoff solenoid (2) Left turbocharger turbine inlet temperature sensor (3) Exhaust port temperature sensor (4) Left turbocharger compressor inlet pressure sensor (5) Secondary engine speed / timing sensor (6) Primary engine speed / timing sensor (7) Fuel control valve (8) Fuel heater (9) Gas regulator (10) Gas shutoff valve (GSOV) (11) Customer connection (12) Service tool connector (13) Detonation sensor (14) Crankcase pressure sensor |
Show/hide table
Illustration 6 | g03387780 |
Typical right-hand side view (15) Right turbocharger compressor inlet pressure sensor (16) Oil temperature sensor (17) Right turbocharger turbine inlet temperature sensor (18) Unfiltered fuel pressure sensor (19) Filtered fuel pressure sensor (20) Filtered oil pressure sensor (21) Timing cal sensor (22) Unfiltered oil pressure sensor (23) Magnetic speed sensor |
Show/hide table
Illustration 7 | g03387781 |
Typical front view (24) Coolant temperature sensor (25) Air inlet manifold pressure sensor (26) Atmospheric pressure sensor (27) ECM connector J2/P2 (28) ECM connector J1/P1 (29) ISM connector J2/P2 (30) ISM connector J1/P1 (31) Air inlet manifold temperature sensor |
Location Of The R1S Engine Sensors
Show/hide table
Illustration 8 | g03387784 |
Typical left-hand side view (1) Left turbocharger turbine inlet temperature sensor (2) Exhaust port temperature sensor (3) Air shutoff feedback switch (4) Left turbocharger compressor inlet pressure sensor (5) Secondary engine speed / timing sensor (6) Primary engine speed / timing sensor (7) Fuel control valve (8) Fuel heater (9) Gas regulator (10) Gas shutoff valve (GSOV) (11) Customer connection (12) Service tool connector (13) Detonation sensor (14) Crankcase pressure sensor |
Show/hide table
Illustration 9 | g03387785 |
Typical right-hand side view (15) Right turbocharger compressor inlet pressure sensor (16) Oil temperature sensor (17) Right turbocharger turbine inlet temperature sensor (18) Unfiltered fuel pressure sensor (19) Filtered fuel pressure sensor (20) Filtered oil pressure sensor (21) Timing cal sensor (22) Unfiltered oil pressure sensor (23) Magnetic speed sensor |
Show/hide table
Illustration 10 | g03390160 |
Typical front view (24) Coolant temperature sensor (25) Air inlet manifold temperature sensor (26) Air inlet manifold pressure sensor (27) Atmospheric pressure sensor (28) ECM connector J2/P2 (29) ECM connector J1/P1 (30) ISM connector J2/P2 (31) ISM connector J1/P1 |
Caterpillar Information System:
C280-16 Engine Flywheel and Ring Gear - Remove and Install
Procedure to Rework Primary and Secondary Throttle Circuits on Certain C32 Marine Engines{1408} Procedure to Rework Primary and Secondary Throttle Circuits on Certain C32 Marine Engines{1408}
2013/05/17 New Instrument Panel Box Gp Is Now Available On Certain Cat® Engines and Gensets {7451}
3512E Tier 4 Final Engines for Land Electric Drilling Coolant Temperature Is Low
C13, C15, and C18 Tier 4 Final Engines Nitrogen Oxide Sensor
C280-16 Engine Vibration Damper - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operation
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Work Tools
CEM Locomotive Aftertreatment Configuration Parameters
3512C Petroleum Engines with Dynamic Gas Blending Air Shutoff - Test
374F Excavator Cooling System Coolant Level - Check
390F MHPU Mobile Hydraulic Power Unit Diesel Exhaust Fluid - Fill
3512C Petroleum Engines with Dynamic Gas Blending System Overview
3512C Petroleum Engines with Dynamic Gas Blending Sensor Signal (Analog, Passive) - Test
3512C Petroleum Engine with Dynamic Gas Blending Electronic Control System Operation
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending CAN Data Link
3512C Petroleum Engine with Dynamic Gas Blending Electronic Control Module (ECM)
3512C Petroleum Engine with Dynamic Gas Blending Engine Monitoring System
3512C Petroleum Engine with Dynamic Gas Blending Fuel System Operation
120 and 120 AWD Motor Grader Parking
3512C Petroleum Engine with Dynamic Gas Blending Fuel Pressure - Gas System
Tool Operating Manual for the Field Service Tool for Three60 Precision Control {0785, 5705, 7610} Tool Operating Manual for the Field Service Tool for Three60 Precision Control {0785, 5705, 7610}
C280-16 Engine Oil Temperature Regulators - Remove and Install
UPS Universal Maintenance Bypass Controller Safety Messages