Diesel Particulate Filter - Disassemble
Show/hide table
 |
|
在处理用过的柴油微粒滤清器或催化转化器消声器时，请配戴护目镜、手套、防护服以及经过职业安全与健康管理局（NIOSH）批准的 P95 或 N95 半面式防尘面罩。 否则可能造成人身伤害。 |
Show/hide table
| 注意 |
|---|
|
不要敲打柴油颗粒滤清器（DPF）组件的任何部位。 不要让任何物体接触 DPF 的内芯。 如果 DPF 的内芯损坏，必须更换组件。 |
- 标记部件的位置，以便于安装。
Show/hide table
图 1 g03337342 Show/hide table
图 2 g03337375 - 将温度传感器 (1) 从泵体组件 (8) 上拆下。 拆下管组件 (4) 和压力传感器 (5)。
- 拆下螺栓 (6)。 拆下泵体组件 (8) 和密封垫 (12)。
- 拆下螺栓 (7) 以分离 DPF 滤清器组件 (9) 和套环 (10)。 拆下 DPF 滤清器组件 (9)。
- 将温度传感器 (2) 从套环 (10) 上拆下。 拆下套环 (10) 和密封垫 (12)。
- 将温度传感器 (3) 从催化器组件 (11) 上拆下。 拆下催化器组件 (11) 和密封垫 (12)。
- 清洁柴油微粒滤清器 (DPF)。 参考专门说明书, REHS7788, "清洁 C3.3B 和 C3.8 发动机上的柴油颗粒滤清器 (DPF)"。
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C3.3B Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
308E2 CR and 308E2 SR Mini Hydraulic Excavators Shovel Crane - Inspect - If Equipped
C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install
C3.3B Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C32 Auxiliary Engine Aftercooler Condensate Drain Valve - Inspect/Clean
3000 Frame SR5 Electric Power Generation Service Tools
3000 Frame SR5 Electric Power Generation General Information
2013/01/16 Removal of the Zinc Anode Is Recommended on Certain C32 Commercial Engines {1380, 3319}
C3.3B Engines for Caterpillar Built Machines Pressure Sensor (Mass Air Flow) - Remove and Install
3500C Marine Engines Engine Design
3500C Marine Engines Engine Design
C3.3B Engines for Caterpillar Built Machines Diesel Particulate Filter - Assemble
3500C Marine Engines Engine Design
3500C Marine Engines Engine Design
3500C Marine Engines Engine Design
3500B Locomotive Engines Engine Design
3500C Marine Engines Engine Design
308E CR Mini Hydraulic Excavator Machine System Specifications Coupler Lines
3500C Marine Engines Engine Design
C32 Marine Engine Engine Air Cleaner Service Indicator - Inspect
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057} Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
C32 Marine Engine Configuration Parameters
C3.3B Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install