Exhaust Manifold
Show/hide table
Illustration 1 | g03333540 |
Show/hide table
Specification for 384-6112 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
1 | 28 | 239-6808 Clamp | Before assembly, lubricate threads, bearing surfaces and inside diameter of clamps with Loctite C5A copper anti seize.
Torque to |
2 | 4 | 363-2057 Band Clamp | Tighten to Gently tap around the band clamp . Again, tighten to |
3 | 2 | 364-5416 Bellows As | Ensure that the bellows are installed in the proper direction as marked on the bellows by an arrow. |
4 | 4 | 241-2634 Clamp As | Tighten to Gently tap around the band clamp. Again, tighten to |
Before assembly, lubricate threads, bearing surfaces and inside diameter of clamps with Loctite C5A copper anti seize. | |||
5 | 4 | 9L-2295 High Temperature Bolt | Before assembly, lubricate threads and bearing surfaces with Loctite C5A copper anti seize. |
6 | 64 | 9L-7373 High Temperature Bolt | Before assembly, lubricate threads and bearing surfaces with Loctite C5A copper anti seize.
Tighten to Again, tighten to |
Caterpillar Information System:
3500C Marine Engines Exhaust Manifold
3500 Engines for Caterpillar Built Generator Sets Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500 Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500 Engines for Caterpillar Built Generator Sets Turbocharger
3500C Marine Engines Exhaust Manifold
3500 Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500 Industrial Engines Camshaft
3500 Engines Exhaust Manifold
3500 Industrial Engines Aftercooler
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
2012/12/21 An Improved Transmission Harness Is Now Used for Certain Cat® Products {1408, 3167, 5736}
2013/04/04 Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
3512B SR4B Generator Sets Maintenance Interval Schedule - Prime
3512B SR4B Generator Sets Maintenance Interval Schedule - Standby
2013/03/01 New Suction Screen and Handle Are Used in 3500 Machine Engines {1302, 1302}
2013/02/20 New Oil Mist Detectors Are Available for Certain 3516 Marine Engines {1336}
2013/02/20 An Improved Thermostat Is Used for Certain 3500 Marine Engines {1355}
3500C Marine Engines Camshaft
3500C Marine Engines Camshaft
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Camshaft