Turbocharger
Show/hide table
Illustration 1 | g03333783 |
Show/hide table
Specification for 379-5304 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 7W-2297 Clamp As | Use the following procedure in order to tighten clamp assemblies:
1. Tighten clamp assemblies to 2. Gently tap around the clamp assemblies with a soft faced hammer. 3. Again, tighten clamp assemblies to |
2 | 2 | 9N-2038 Turbine Clamp As | |
3 | 8 | 2N-2765 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
4 | 8 | 2N-2766 Locknut | Torque to |
5 | 2 | 6L-3005 Band Clamp | Use the following procedure in order to tighten clamps on the bellows assembly:
1. Tighten clamps to 2. Gently tap around the clamps with a soft faced hammer. 3. Again, tighten clamps to |
Caterpillar Information System:
3500C Marine Engines Exhaust Manifold
3500 Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500 Industrial Engines Camshaft
3500 Engines Exhaust Manifold
3500 Industrial Engines Aftercooler
3500B Engines for Caterpillar Built Power Modules Aftercooler
3500 Engines Fuel Filter (Primary)
CG137-08 and CG137-12 Engines Connecting Rod Bearings - Remove and Install
3512B and 3516B Engines Alternator - Remove and Install
3500 Engines Exhaust Manifold
Assembly of the 112-5506 Limit Switch As for Certain 3600 and C280 Engine Air Shutoffs{1078, 1408, 1435} Assembly of the 112-5506 Limit Switch As for Certain 3600 and C280 Engine Air Shutoffs{1078, 1408, 1435}
3500C Marine Engines Exhaust Manifold
3500 Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500 Engines for Caterpillar Built Generator Sets Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
2012/12/21 An Improved Transmission Harness Is Now Used for Certain Cat® Products {1408, 3167, 5736}
2013/04/04 Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
3512B SR4B Generator Sets Maintenance Interval Schedule - Prime
3512B SR4B Generator Sets Maintenance Interval Schedule - Standby
2013/03/01 New Suction Screen and Handle Are Used in 3500 Machine Engines {1302, 1302}