C3.4B Engines for Caterpillar Built Machines Caterpillar


Pressure Sensor (DPF) - Remove and Install

Usage:

CD-44B 398

拆卸步骤




图 1g03005940

  1. 将线束接头从柴油微粒滤清器 (DPF) 压差传感器 (2) 上断开。

  1. 将卡子 (4) 从软管组件 (6) 上拆下。 将卡子 (5) 从软管组件 (7) 上拆下。

  1. 将软管组件 (6) 和 (7) 从 DPF 压差传感器 (2) 上断开。

  1. 将螺栓 (3) 从 DPF 压差传感器 (2) 上拆下。

  1. 将 DPF 压差传感器 (2) 从支架 (1) 上拆下。

安装步骤




图 2g03005940

  1. 将 DPF 压差传感器 (2) 定位到支架 (1) 上。

  1. 安装螺栓 (3) ,并手动拧紧到 DPF 压差传感器 (2) 上。 拧紧螺栓至扭矩为 9 N·m (80 lb in)

  1. 将新的卡子 (4) 定位到软管组件 (6) 上。

  1. 将软管组件 (6) 和卡子 (4) 安装到 DPF 压差传感器 (2) 上。 牢固拧紧卡子 (4) 。

    注: 不要过度拧紧卡子 (4) 。

  1. 将新的卡子 (5) 定位到软管组件 (7) 上。

  1. 将软管组件 (7) 和卡子 (5) 安装到 DPF 压差传感器 (2) 上。 牢固拧紧卡子 (5) 。

    注: 不要过度拧紧卡子 (5) 。

  1. 将线束组件连接到 DPF 压差传感器 (2) 上。

End By: 当安装新的 DPF 压差传感器时,使用电子维修工具 (EST) 来执行 "DPF 压差传感器更换"步骤。

Caterpillar Information System:

C3.4B Engines for Caterpillar Built Machines Engine Lifting Bracket - Install
C3.4B Engines for Caterpillar Built Machines Engine Lifting Bracket - Remove
C3.4B Engines for Caterpillar Built Machines Connecting Rod Bearings - Install - Connecting rods in position
C3.4B Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
C15 and C18 Engines ARD Spark Plug - Replace - If Equipped
C15 and C18 Engines Diesel Particulate Filter - Clean/Replace - If Equipped
C13, C15, and C18 Engines for Caterpillar Built Machines Exhaust Has Excessive Black Smoke
C13, C15, and C18 Engines for Caterpillar Built Machines Engine Vibration Is Excessive
G3500H 60Hz Generator Sets Engine Speed/Timing Sensor - Clean/Inspect
G3500H 60Hz Generator Sets Engine Oil Level - Check
C13, C15, and C18 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
Mechanical Application and Installation Guide for the CX48-P2300 Petroleum Transmission {3030, 3101} Mechanical Application and Installation Guide for the CX48-P2300 Petroleum Transmission {3030, 3101}
C13, C15, and C18 Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
2012/04/24 New Software Is Used on Certain C32 Petroleum Engines {1901, 1902, 1920}
Breakage of Shift Lever Handle on Certain Articulated Trucks and Off-Highway Trucks{3065, 5063} Breakage of Shift Lever Handle on Certain Articulated Trucks and Off-Highway Trucks{3065, 5063}
G3500H 60Hz Generator Sets Throttle Control Valve - Check
2012/04/24 An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
2012/04/24 An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Electric Starting Motor
C13, C15, and C18 Engines for Caterpillar Built Machines Oil Consumption Is Excessive
349F and 352F Excavators Oil Filter (Hydraulic Hammer) - Replace
C9.3 Engines for Caterpillar Built Machines Oil Contains Fuel
C13, C15, and C18 Engines for Caterpillar Built Machines Power Is Intermittently Low or Power Cutout Is Intermittent
C13, C15, and C18 Engines for Caterpillar Built Machines Valve Lash Is Excessive
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.