Camshaft
Show/hide table
| |
| Illustration 1 | g02970196 |
Show/hide table
| Specification for 212-4289 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 107-7694 Thrust Plate | Thickness is |
| 2 | 1 | 212-4288 Camshaft As | End play of a new camshaft is |
| Maximum permissible end play of a worn camshaft is |
|||
| A | - | - | Diameter of the camshaft journals is |
| B | - | - | Total distance between the shoulder of the camshaft and the shoulder of the gear is |
| C | - | - | Use the following procedure in order to determine the actual camshaft lobe lift:
1. Measure camshaft lobe height (D). 2. Measure the base circle (E). 3. Subtract the base circle (E) from the camshaft lobe height (D). The difference is the actual camshaft lobe lift (C). |
| The maximum permissible difference between the actual camshaft lobe lift (C) and the specified camshaft lobe lift of a new camshaft is |
|||
| Specified camshaft lobe lift:
1. For exhaust lobe is 2. Inlet lobe is |
|||
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines Overspeed
G3304B and G3306B Engines Fan Drive Bearing - Lubricate
Deposits in C175 Engine Fuel Injectors{1251, 1254, 1290, 1713} Deposits in C175 Engine Fuel Injectors{1251, 1254, 1290, 1713}
3512C and 3516C Marine Auxiliary Engines Speed/Timing - Test
C7.1 Generator Set Alternator - Install
C7.1 Generator Set Alternator - Remove
3500 Generator Sets Engine Air Precleaner - Check/Clean
CX48-P2300 Petroleum Transmission Transmission Torque Converter
Procedure to Install an Updated Body Position Switch on Certain 773F and 775F Off-Highway Trucks{1408} Procedure to Install an Updated Body Position Switch on Certain 773F and 775F Off-Highway Trucks{1408}
Installation Procedure for Product Link PL421 Retrofit for Generator Sets{7606} Installation Procedure for Product Link PL421 Retrofit for Generator Sets{7606}
Reports of Corrosion and Pitting on the Front and Rear Suspension Cylinders and Hoist Cylinders on Certain Off-Highway Trucks{5102, 7200, 7201, 7213} Reports of Corrosion and Pitting on the Front and Rear Suspension Cylinders and Hoist Cylinders on Certain Off-Highway Trucks{5102, 7200, 7201, 7213}
3512C and 3516C Marine Auxiliary Engines Electrical Power Supply - Test
C1.5 and C2.2 Industrial Engines Monitoring System
3512C and 3516C Marine Auxiliary Engines Sensor Signal (Analog, Active) - Test
Crankshaft Timing Ring on Certain C4.4 Engines{1202} Crankshaft Timing Ring on Certain C4.4 Engines{1202}
3512C and 3516C Marine Auxiliary Engines Sensor Signal (Analog, Passive) - Test
3512C and 3516C Marine Auxiliary Engines Sensor Signal (PWM) - Test
3500 Generator Sets Refill Capacities
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Safety Messages
3512C and 3516C Marine Auxiliary Engines Sensor Supply - Test
C32 Auxiliary Engine Fuel Injector - Check
VR6 Voltage Regulator Unstable Voltage
CX48-P2300-3512 Petroleum Power Train Package and CX48-P2300 Petroleum Transmission Transmission Specifications
C1.5 and C2.2 Industrial Engines Self-Diagnostics