A New Bolt and Washer Are Used in the Bracket for the Fuel Injection Supply Lines on C175-16 Engines {1252, 7553}
- Generator Set:
- C175-16 (S/N: WYB1-UP)
- Engine:
- C175-16 (S/N: P6L1-UP)
Description of Change: The new structural washer is used with a longer bolt that provides better retention of the bracket for the fuel injection supply lines.
Adaptable To:
The new parts have been added to the 304-9602 Fuel Injection Lines Gp .
The new hardware and the previous hardware are listed in Table 1. The location of the hardware is shown in Illustration 1.
Show/hide table
| New Part | Previous Part |
| 6V-5684 Bolt | 6A-5591 Bolt |
| 198-4767 Hard Washer | 7D-1649 Hard Washer |
Show/hide table
 | |
| Illustration 1 | g02797561 |
(1) 6V-5684 Bolt (2) 198-4767 Hard Washer | |
The new hardware is adaptable to C175-16 Engines back to first production. The new hardware is effective with the following serial numbers:
- WYB00648
- P6L00157
Caterpillar Information System:
C15 Petroleum Generator Set Fluid Recommendations
C15 and C18 Engines for Caterpillar Built Machines DEF Injector and Mounting - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Ignition Coil - Remove and Install
2012/07/19 New High-Pressure Fuel Pumps Are Used for C175-16 Engines {1251}
2012/07/20 New High-Pressure Fuel Pumps Are Used for C175 Off-Highway Truck Engines {1251}
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
G3500 Generator Sets Maintenance Interval Schedule - Landfill
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562} Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
C9.3 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
C9.3 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Combustion Head - Remove and Install
C15 Petroleum Generator Set After Starting Engine
3516C Generator Set Engines Valve Rotator or Spring Lock Is Free
C15 and C18 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install
C15 Petroleum Generator Set Starting the Engine
C15 and C18 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install
C15 Petroleum Generator Set Before Starting Engine
793F Off-Highway Truck Seat
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install
3512C HD Locomotive Engine Catalyst Module - Check
3512C HD Locomotive Engine Catalyst Module - Inspect
3512C HD Locomotive Engine Catalyst Module - Replace