320D2 and 323D2 Excavators Machine Systems Specifications Caterpillar


Air Conditioner Lines

Usage:

320D2 DFM



图 1g03344101

表 1
372-9387 空调管路总成 技术规格    
项目     数量     零件     技术规格说明    
1     2     6V-7357 螺栓     拧紧至扭矩为
5.5 ± 1.5 N·m (48.7 ± 13.3 lb in)。    
2     2     8T-4971 螺栓     拧紧至扭矩为
10 ± 2 N·m (89 ± 18 lb in)。    
3     2     8T-4200 螺栓     拧紧至扭矩为
20 ± 5 N·m (177 ± 44 lb in)。    
4     2     8T-4908 螺栓     拧紧至扭矩为
22.5 ± 2.5 N·m (199.1 ± 22.1 lb in)。    
5     2     8T-4189 螺栓     拧紧至扭矩为
20 ± 2 N·m (177 ± 18 lb in)。    
6     2     8T-4138 螺栓     将支架螺栓上紧到
6 ± 1 N·m (53 ± 9 lb in),或者不断上紧,直到间隙为零。    
7     1     6V-7357 螺栓     拧紧至扭矩为
10 ± 2 N·m (89 ± 18 lb in)。    



图 2g03344103

表 2
项目     数量     零件     技术规格说明    
A     -     -     安装 A/C 软管组件,使其与平台的最小间隙为
50 mm (2.0 in)。    

Caterpillar Information System:

CX48-P2300 Petroleum Transmission Transmission Modulating Valve (Electronic Clutch Pressure Control)
C13 Engine for Combat and Tactical Vehicles Engine Oil Cooler
2011/12/23 A New Liner for the Auxiliary Pump Is Used on Certain Commercial Engines {1371}
320 GC, 320 and 323 Excavator Machine Systems Specifications Grease Lines
Cat® Detect Object Detection System MID 134 - CID 0168 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 0168 - FMI 03
C18 Generator Sets Fuel System - Prime
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738} 4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555} Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Plate Locations and Film Locations
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701} NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
345D, 349D and 349D2 Excavators Mirror - If Equipped
C3.4B Industrial Engine Engine Operation
2012/02/17 New Horn Is Now Used On Certain Cat Products {7402}
2011/12/14 New Main Stator Gp And Fan Are Now Used on Certain G3520C Generator Set {4450, 4453, 4457}
C13 Engine for Combat and Tactical Vehicles Engine Oil Pan
320D and 323D Excavators Machine System Specifications Operator Console
320D2 Forest Machine Machine System Specifications Hydraulic Oil Cooler Lines Group
374F Excavator Machine System Hydraulic Pedal Control (Travel)
3516C Generator Set Engines Engine Air Cleaner Service Indicator
2012/01/12 A New Water Temperature Regulator for the Separate Circuit Is Available for Certain 3500B Locomotive Engines {1355, 1393}
C13 Engine for Combat and Tactical Vehicles Water Temperature Regulator Housing
2011/12/01 Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Belt - Inspect/Adjust/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.