CX48-P2300 Petroleum Transmission Transmission Caterpillar


Modulating Valve (Electronic Clutch Pressure Control)

Usage:

CX48-P2300 GDH


图 1g02728539

表 1
258-8987 调节阀总成的技术规格 
项目  数量  零件  技术规格说明 
218-2373 螺母  将蓝色 Loctite 242 涂抹在螺纹上。 
拧紧至扭矩为 13.0 ± 1.5 N·m (115.1 ± 13.3 lb in)
244-3116 阀芯组件(1)   拧紧至扭矩为 50 ± 5 N·m (37 ± 4 lb ft)。 
6V-8641 接头(1)  拧紧至扭矩为 14 ± 4 N·m (124 ± 35 lb in)。 
323-9531 线圈  工作电压为 24 VDC。 
温度为 25 °C (77 °F) 时的电阻为 8.7 ± 0.4 欧姆。
(1) 不单独维修的零件。


图 2g02728540

表 2
258-8987 调节阀总成的技术规格 
项目  数量  零件  技术规格说明 
238-5080 O 形密封圈  用少量密封的润滑剂进行润滑。 
317-0810 O 形密封圈  用少量密封的润滑剂进行润滑。 
321-5643 弹簧(1)  在试验力下的长度为 14.00 mm (0.551 in)。 
试验力为 36.0 ± 1.8 N (8.1 ± 0.4 lb)
试验后的自由长度为 15.99 mm (0.630 in)
300-5898 阀芯组件(1)   将绿色 Loctite 固定胶 620 涂抹在螺纹上。 
拧紧至扭矩为 16 ± 2 N·m (142 ± 18 lb in)
160-7974 调整螺钉(1)  将绿色 Loctite 固定胶 620 涂抹在螺纹上。 
拧紧至扭矩为 10 ± 2 N·m (89 ± 18 lb in)
10  135-5440 节流孔(1)  将绿色 Loctite 固定胶 620 涂抹在螺纹上。 
拧紧至扭矩为 2.0 至 2.5 N·m (17.7 至 22.1 lb in)
(1) 不单独维修的零件

Caterpillar Information System:

C13 Engine for Combat and Tactical Vehicles Engine Oil Cooler
2011/12/23 A New Liner for the Auxiliary Pump Is Used on Certain Commercial Engines {1371}
320 GC, 320 and 323 Excavator Machine Systems Specifications Grease Lines
Cat® Detect Object Detection System MID 134 - CID 0168 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 0168 - FMI 03
C18 Generator Sets Fuel System - Prime
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738} 4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555} Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Plate Locations and Film Locations
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701} NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
345D, 349D and 349D2 Excavators Mirror - If Equipped
G3304B and G3306B Engines Catalytic Converter Substrate - Replace
320D2 and 323D2 Excavators Machine Systems Specifications Air Conditioner Lines
C3.4B Industrial Engine Engine Operation
2012/02/17 New Horn Is Now Used On Certain Cat Products {7402}
2011/12/14 New Main Stator Gp And Fan Are Now Used on Certain G3520C Generator Set {4450, 4453, 4457}
C13 Engine for Combat and Tactical Vehicles Engine Oil Pan
320D and 323D Excavators Machine System Specifications Operator Console
320D2 Forest Machine Machine System Specifications Hydraulic Oil Cooler Lines Group
374F Excavator Machine System Hydraulic Pedal Control (Travel)
3516C Generator Set Engines Engine Air Cleaner Service Indicator
2012/01/12 A New Water Temperature Regulator for the Separate Circuit Is Available for Certain 3500B Locomotive Engines {1355, 1393}
C13 Engine for Combat and Tactical Vehicles Water Temperature Regulator Housing
2011/12/01 Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.