Heat Exchanger
Show/hide table
 | |
| Illustration 1 | g02587497 |
Front view of engine | |
Show/hide table
 | |
| Illustration 2 | g01114866 |
Tightening sequence | |
Show/hide table
| Specification for 284-3695 Sea Water Heat Exchanger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 10 | 5P-7971 Bolt | Use the following procedure to tighten the bolts (1). 1. Install guide studs, washers, and nuts in locations (5) and (6). Hand tighten bolt (1) through bolt (4) in the numerical sequence as shown in Illustration 2. Use three incremental steps to tighten the bolts. 2. Remove the guide studs from locations (5) and (6). 3. Install the spacers (2) in locations (5) and (6). 4. Tighten bolt (1) through bolt (10) in the numerical sequence as shown in Illustration 2. |
| 2 | 2 | 166-4392 Special Spacer | |
Caterpillar Information System:
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger Exhaust Temperature Sensor
C27 and C32 Engines for Caterpillar Built Machines Cylinder Block
3176C and 3196 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor
C27 Generator Set Fuel System Primary Filter/Water Separator - Drain
3512C SR4B Generator Sets Safety Messages
70 Pin Connector Guide for TH55-E70-3512CP Petroleum Power Train Package{7451, 7553, 7566} 70 Pin Connector Guide for TH55-E70-3512CP Petroleum Power Train Package{7451, 7553, 7566}
C27 Generator Set Single Unit Operation
3516C Engine Selective Catalytic Reduction Module - Assemble - <B>374-2501</B> Catalytic Converter Gp
C27 Generator Set Generator Winding - Test
Failure of the Turbocharger Thrust Bearing in a 3508B Locomotive Engine{1052} Failure of the Turbocharger Thrust Bearing in a 3508B Locomotive Engine{1052}
2011/08/09 Radiator Fan Alignment, Fan Clearance Check, and Fan Belt Tensioning on Certain C15 Engines, C18 Engines, 3406 Generator Sets, and 3456 Generator Sets {1356, 1359, 1360}
C3.4B Industrial Engine Diesel Particulate Filter Regeneration
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Crankcase Pressure Sensor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Atmospheric Pressure Sensor
3516C Engine Control Cabinet - Disassemble - <B>374-2499</B> Control Cabinet Gp
C32 Marine and Auxiliary Marine Engines Auxiliary Water Pump
G3406 and G3412 Generator Set Engines Water Pump
3516C Engine Control Cabinet - Assemble - <B>374-2499</B> Control Cabinet Gp
XQ400 Power Module Water Pump - Inspect
3516B HD Generator Set Alarms and Shutoffs
2011/06/08 An Improved Fuel Priming Pump Gasket Is Now Used on Certain Commercial Engines {1258, 7555}
2011/06/08 An Improved Fuel Priming Pump Gasket Is Now Used on Certain Machine Engines {1258, 7555}
Cat Water Delivery System (WDS) Caterpillar Reference Material
C15 Generator Sets Product Installation