3508B Engine for Caterpillar Built Machines Caterpillar


Balancer Group (Front)

Usage:

854G 1JW


图 1g02576177
前视图
(3) 平衡齿轮
(4) 曲轴齿轮

表 1
技术规格 - 332-7916 平衡器总成和 101-0833 平衡器总成 
项目  数量  零件  技术规格说明 
8M-2530 螺栓  拧紧至扭矩为 140 ± 10 N·m (103 ± 7 lb ft)。 
4W-4998 齿轮轴  新齿轮轴的直径为 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch)
组装后, 7N-6983 衬套的孔径为 75.000 ± 0.053 mm (2.9528 ± 0.0021 inch)。 
101-1365 止推片  厚度为 6.35 ± 0.25 mm (0.250 ± 0.010 inch)。 
101-9043 平衡齿轮组件  平衡齿轮上的标记必须和曲轴齿轮上的标记对准。 

Caterpillar Information System:

3500B Engines for Caterpillar Built Power Modules Gear Group (Rear)
G3500 Engines Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines Housing (Front)
C175-16 Marine Propulsion Engines Vibration Damper Guard
3500 Industrial Engines Crankshaft
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
C15 and C18 Industrial Engines Vibration Damper
G3406 Engine Coolant - Change
CX31 and CX31 HT On-Highway Transmissions Transmission Hydraulic Control
C13, C15, and C18 Tier 4 Final Engines Camshaft
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Administration: Security
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551} Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
CG137-08 and CG137-12 Engines Crankcase Blowby - Test/Record
XQ400 Power Module Driven Equipment - Check
3406C Generator Sets Refill Capacities
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Metal Particle Detector
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Administration: Network Features
3516B Generator Set Engines with Dynamic Gas Blending Metal Particle Detector - Test
CG137-08 and CG137-12 Engines Engine Oil and Filter - Change
CG137-08 and CG137-12 Engines Engine Oil Sample - Obtain
C27 and C32 Tier 4 Final Marine Engines Piston and Rings
325D and 329D Excavators Machine System Specifications Hydraulic Pedal Control (Auxiliary)
349F and 352F Excavators Machine System Specifications Pressure Reducing Valve (Boom Priority)
C175-16 Marine Propulsion Engines Fuel Transfer Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.