3500 Industrial Engines Caterpillar


Crankshaft

Usage:

3516 27Z


图 1g03324465

表 1
技术规格 - 8N-0337 曲轴总成 161-6928 曲轴总成 
项目  数量  零件  技术规格说明 
更多信息,请参阅技术规格, "连杆和主轴承承颈"。 
7C-6209 止推片  仅用于中心主轴承上,如图 1 所示。 
2W-2288 塞  拧紧至扭矩为 50 ± 7 N·m (37 ± 5 lb ft)。 
48  128-4845 螺栓组件  采用以下步骤拧紧螺栓:

1. 组装前,使用 molylube 润滑螺栓螺纹、螺栓杆、垫圈和螺栓头底部。
2. 将螺栓均匀拧紧至 70 ± 5 N·m (52 ± 4 lb ft)
3. 将各螺栓再转动 120 ± 5 度。
不要重复使用配重螺栓。 
新曲轴的端隙为 0.17 to 0.63 mm (0.007 to 0.025 inch)。 

Caterpillar Information System:

C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
C15 and C18 Industrial Engines Vibration Damper
G3406 Engine Coolant - Change
CX31 and CX31 HT On-Highway Transmissions Transmission Hydraulic Control
C13, C15, and C18 Tier 4 Final Engines Camshaft
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Administration: Security
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551} Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Communication Adapter II{0600, 0709, 7600, 7610} Communication Adapter II{0600, 0709, 7600, 7610}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679} Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
3406C Generator Sets Plate Locations and Film Locations
C175-16 Marine Propulsion Engines Vibration Damper Guard
C27 and C32 Engines for Caterpillar Built Machines Housing (Front)
G3500 Engines Gear Group (Front)
3500B Engines for Caterpillar Built Power Modules Gear Group (Rear)
3508B Engine for Caterpillar Built Machines Balancer Group (Front)
CG137-08 and CG137-12 Engines Crankcase Blowby - Test/Record
XQ400 Power Module Driven Equipment - Check
3406C Generator Sets Refill Capacities
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Metal Particle Detector
Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Administration: Network Features
3516B Generator Set Engines with Dynamic Gas Blending Metal Particle Detector - Test
CG137-08 and CG137-12 Engines Engine Oil and Filter - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.