C15 On-highway Engine Caterpillar

Connecting Rod

Usage:

C15 BXS

Show/hide table




Illustration 1	g02572936

Show/hide table

Table 1
Specification for 292-0483 Connecting Rod
Item	Qty	Part	Specification Description
1	1	229-6259 Bearing	Length (A) 95 mm (3.7 inch) may be heated to 175 °C to 260 °C (347 °F to 468 °F) to assemble the small end connecting rod bearing.
			Bore in the connecting rod for connecting rod bearing is 64.592 ± 0.013 mm (2.5430 ± 0.0005 inch).
			Bore in the connecting rod bearing after assembly is 60.035 ± 0.008 mm (2.3636 ± 0.0003 inch).
			Thoroughly lubricate the piston pin with clean engine oil prior to assembly of the piston and connecting rod.
			Diameter of the piston pin is 59.975 ± 0.005 mm (2.3612 ± 0.0002 inch).
2	1	292-0484 Connecting Rod Bearing	Bore in the large end of connecting rod for the connecting rod bearing is 103.200 ± 0.013 mm (4.0630 ± 0.0005 inch).
3	2	115-2973 Bolt	Use the following procedure to tighten the bolts: 1. Lubricate the bolt threads and bolt seating faces with clean engine oil before assembly. 2. Tighten bolt 1 and bolt 3 to 70 ± 4 N·m (51.62920 ± 2.95024 lb ft). 3. Tighten bolt 2 and bolt 4 to 70 ± 4 N·m (51.62920 ± 2.95024 lb ft). 4. Tighten bolt 2 and bolt 4 to an additional 60 ± 5 degrees. 2. Tighten again bolt 1 and bolt 3 to 70 ± 4 N·m (51.62920 ± 2.95024 lb ft). 4. Tighten bolt 1 and bolt 3 to an additional 60 ± 5 degrees.
-	-	-	Distance (B) between center of the bearings is 270.76 mm (10.660 inch).

Caterpillar Information System:

3500 Engines Piston and Rings - Two-Piece Piston

Network Management Card with Modbus for the UPSB505 Uninterruptible Power Supply Information Logs

CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission)

2011/10/03 An Improved Lubrication System is Now Used on the TH48-E80 Petroleum Transmission {3030}

CX31 and CX31 HT On-Highway Transmissions Relief Valve (Transmission Hydraulic Control)

3500 Engines Cylinder Block

C15 and C18 Industrial Engines Water Lines

C15 Petroleum Engines Alternator Problem - Charging Problem and/or Noisy Operation

3500B Engines for Caterpillar Built Power Modules Cylinder Block

C13, C15, and C18 Generator Set Engines Engine Oil Pan

C13, C15, and C18 Generator Set Engines Engine Oil Pan

C15 and C18 Petroleum Engines Engine Oil Pan

C175-16 Marine Propulsion Engines Exhaust Flange

C175-16 Marine Propulsion Engines Exhaust Flange

3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Connecting Rod

3406C Engines for Caterpillar Built Machines Engine Oil Pump

CX31 and CX31 HT On-Highway Transmissions Transmission Planetary

C27 and C32 Engines for Caterpillar Built Machines Gear Group (Front)

3500 Engines Connecting Rod and Main Bearing Journals

3500 Engines Crankshaft

3500B Locomotive Engines Crankshaft

3406C Generator Sets Plate Locations and Film Locations

C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves

C13, C15, and C18 Tier 4 Final Engines Cylinder Head