Fuel Priming Pump - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g02430236 - Remove bolts (1). Remove fuel priming pump assembly (2) from fuel filter base (3).
- Remove gasket (4) from the fuel priming pump assembly and the fuel filter base.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position gasket (4) on fuel filter base (3).
- Position fuel priming pump assembly (2) on the fuel filter base and install bolts (1). Tighten the bolts to a torque of
13 ± 3 N·m (115 ± 27 lb in) . - Turn the fuel supply to the “ON” position.
- Remove the air from the system. Refer to Testing and Adjusting, "Fuel System - Prime".
Show/hide table
| |
| Illustration 2 | g02430236 |
Caterpillar Information System:
300.9D and 300.9D VPS Mini Hydraulic Excavator Operator Station
300.9D and 300.9D VPS Mini Hydraulic Excavator Slope Operation
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine Stopping
300.9D and 300.9D VPS Mini Hydraulic Excavator Visibility Information
3116 and 3126 Marine Engines Reference Information
Cracking of the Aftercooler Radiator Cores on PM3516 XQ2000 Power Modules{1353} Cracking of the Aftercooler Radiator Cores on PM3516 XQ2000 Power Modules{1353}
C15 Petroleum Engines Before Starting Engine
349F and 352F Excavators Mirror - If Equipped
C175-16 Marine Engines Fuel System Operation
3516C and C175-16 Engines Selective Catalytic Reduction System Overview
Mobil-TracSystems/MTS {4198} Mobil-TracSystems/MTS {4198}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950} Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
C15 Petroleum Engines Fuel Filter Base - Remove
TA19 Transmission Pump Drive - Install
C15 Petroleum Engines Fuel Filter Base - Install
C15 Petroleum Engines Alternator Is Noisy
349F and 352F Excavators Engine Starting
C13 and C15 Generator Set Engines Aftercooler - Test
C15 Petroleum Engines Turbocharger - Remove
Ice in the Cooling Systems of C175-16 Generator Sets{1350} Ice in the Cooling Systems of C175-16 Generator Sets{1350}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Safety Signs and Labels
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys General Hazard Information
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Fire Prevention and Explosion Prevention
C4.4 Industrial Engine Fire Prevention and Explosion Prevention