Specialty Lubricants
Show/hide table
| Special-Purpose Cat Lubricants | |
|---|---|
| Item | Size |
| 6V-4876 Lubricant (1) | 500 g (17.6 oz) |
| 5P-3931 Thread Compound (2) | 150 g (5.3 oz) |
| 334-0519, Rod bolt torque grease | 576 g (20 oz) |
Show/hide table
| (1) | Recommended for use on typical components such as head bolt threads and washers. |
| (2) | Recommended for mating connectors such as exhaust manifold studs and exhaust manifold nuts. |
Show/hide table
| UV Visible Dyes for Leak Detection | |||
|---|---|---|---|
| Part Number | Description | Size | Dosage |
| To detect oil leaks in engines, transmissions, hydraulic systems | |||
| 1U-5572 | Oil Glo 22 Additive | 28.4 gram( 1 ounce) bottle | 28.4 gram (1ounce) per 7.58 L (2 Us gal) of oil |
| 1U-5573 | Oil Glo 22 Additive | 0.47 L( 1 pint) bottle | 28.4 gram (1 ounce) per 7.58 L( 2 US gal) of oil |
| To detect fuel leaks or suspected fuel dilution | |||
| 1U-5574 | Gas Glo 32 Additive | 28.4 gram( 1 ounce) bottle | 28.4 gram (1 ounce) per 37.9 L (10 US gal) of gasoline or diesel fuel |
| 1U-5575 | Gas Glo 32 Additive | 0.47 L( 1 pint) bottle | 28.4 gram (1 ounce) per 37.9 L (10 US gal) of gasoline or diesel fuel |
| To detect cooling system leaks | |||
| 1U-5576 | Water Glo 23 Additive | 28.4 gram( 1 ounce) bottle | 28.4 gram (1ounce) per 151.5 L (40 US gal) of water |
| 1U-5577 | Water Glo 23 Additive | 0.47 L( 1 pint) bottle | 28.4 gram (1ounce) per 151.5 L (40 US gal) of water |
The dyes must be used with a special Glo Gun to detect the leaks. Consult your local Cat dealer for availability.
Caterpillar Information System:
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Model View Illustrations
CG137-08 and CG137-12 Industrial Engines Gas Pressure - Check and Adjust
CG137-08 and CG137-12 Industrial Engines Inlet Air Is Restricted
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is Low
345D, 349D and 349D2 Excavator Machine System Specifications Position Sensor (Stick)
CG137-08 and CG137-12 Industrial Engines Exhaust Temperature Is High
C32 Generator Set Plate Locations and Film Locations
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
PM3516 Power Modules Battery Charger - Check
3512C and 3516C Marine Auxiliary and Generator Set Engines Coolant Level - Check
C13 and C15 Generator Set Engines Air Inlet and Exhaust System
3600 and C280 Diesel Engine Fluids Recommendations Cold Weather Lubricants
C18 Industrial Engines Product Description
CG137-08 and CG137-12 Industrial Engines Power Is Low
C18 Industrial Engines Refill Capacities
C15 and C18 Industrial Engines Flywheel Housing
CG137-08 and CG137-12 Industrial Engines Fuel Flow Rate Is Low
349F and 352F Excavators Sound Information and Vibration Information
349F and 352F Excavators Storage Box
C6.6 Industrial Engine Exhaust Cooler (NRS) - Install
C6.6 Industrial Engine Exhaust Cooler (NRS) - Remove
CX28 Transmission For Combat and Tactical Vehicles Transmission ; Transfer Case Electronic Control System Transfer Case Low Range Indicator and Wheel Locks Do Not Operate
C13 and C15 Generator Set Engines Air Inlet and Exhaust System - Inspect