New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
- Industrial Engine:
- C18 (S/N: WJH1-UP)
Description of Change: The new turbochargers have an increased service life over the existing turbochargers.
Adaptable To: The new 358-4920 Turbocharger Gp and the 358-4922 Turbocharger Gp are direct replacements for the existing turbochargers. Refer to Table 1 for the part numbers of the turbochargers that are being replace by the new turbochargers.
Show/hide table
New Part Number     | Former Part Number     |
358-4920     | 288-7179     |
358-4922     | 288-7180     |
Caterpillar Information System:
G3500 Generator Sets Model View Illustrations
C7.1 Industrial Engine and Generator Set Ether Starting Aid - Test
G3512E Generator Set Engine Fuel Metering Valve - Test
G3500 Generator Sets Additional Messages
2010/03/02 New Settings Are Now Used For EMCP 3 On Certain Generator Sets {4490}
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing - Replace - SR5 Generator Bearings
C15 and C18 Petroleum Generator Sets Generator Bearing - Inspect
349F and 352F Excavators Hydraulic System Oil - Change
349F and 352F Excavators Hydraulic System Main Hydraulic Pump Air - Purge
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base
C27 Generator Set Engines Air Lines
C27 and C32 Engines for Caterpillar Built Machines Camshaft
C13 Industrial Engines Fuel Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C11 and C13 Engines Water Pump
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record