CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Caterpillar


MID 027 - CID 0168 - FMI 03

Usage:

CX35-C18I PCF
产生此代码的情况:

变速箱 ECU 识别系统电压高于 32 VDC 时,记录该诊断代码。 该诊断代码仅在发动机运行时激活。 该代码将锁定,直到满足重置条件。 该代码在发动机断开时不会被激活。 如果代码激活,充电系统以过大速率充电。

产生此诊断代码的可能原因如下:

  • 电压调节器的不当操作

造成该代码的最有可能的原因是充电系统故障。

测试步骤 1. 检查充电系统。

检查充电系统。

结果:

  • 是 - 对充电系统进行测试。

    修复: 请参阅本手册中正在维修的发动机的测试和调整, "充电系统 - 测试"。

    停止

Caterpillar Information System:

C12 Marine Engines Aftercooler
C9.3 Engines for Caterpillar Built Machines Engine Control Module - Remove and Install
C6.6 Industrial Engine Exhaust Gas Valve (NRS)
797F and 797F XQ Off-Highway Truck Steering System Steering Linkage and Cylinder Mounting
G3512E Generator Set Engines Air Lines
797F and 797F XQ Off-Highway Truck Power Train Speed Sensor (Rear Wheel)
G3512E Generator Set Engines Air Lines
3000 Frame SR5 Electric Power Generation Generator - Align
Generator Bearing Service {4457} Generator Bearing Service {4457}
C4.4 Industrial Engine Refrigerant Compressor
C7.1 Engines for Caterpillar Built Machines Fan Drive
2009/06/22 Retirement of Paper Version of Service Magazines and Engine News {1000, 7000}
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0168 - FMI 04
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission System Schematic
G3516C and G3516E Gas Engines Cover Group (Front Housing)
G3520E Generator Set Engines Cover Group (Front Housing)
797F and 797F XQ Off-Highway Truck Steering System Steering Cylinder
797F and 797F XQ Off-Highway Truck Hydraulic System Hoist Cylinder
797F and 797F XQ Off-Highway Truck Power Train Temperature Sensor (Differential Oil)
797F and 797F XQ Off-Highway Truck Braking System Oil Filter (Brake Cooling, Fan, Steering Return)
3500 Engines Prelubrication Oil Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
3500 Engines Electronic Control Module (Engine) - Remove and Install
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.