Pressure Reducing Valve (Travel Parking Brake) - Test and Adjust
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Description | Qty |
| A | 8T-0861 | Pressure Gauge ( 60000 kPa (8700 psi)) |
1 |
| B | 6V-9828 | Cap | 1 |
| C | 8T-6776 | Adapter | 1 |
| D | 4J-5477 | O-ring | 1 |
- Position the machine on level ground.
- Stop the engine.
- Remove line (1) from fitting (2) .
Show/hide table
 | |
| Illustration 1 | g01945296 |
Left travel motor (1) Line (2) Fitting | |
- Install cap (B) on fitting (2) .
- Connect pressure gauge (A) to line (1) by using tools (C) and (D) .
- Place a track block (6) in sprocket (5) in order to block forward left travel. Refer to Illustration 2.
Show/hide table
 | |
| Illustration 2 | g01622165 |
Sprocket (left track) (5) Sprocket (6) Track block | |
- Start the engine.
- Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF.
- Increase the hydraulic oil temperature to 55° ± 5°C (131° ± 9°F).
- Slowly move the left travel control lever to full FORWARD position and check the pressure setting of the pressure reducing valve for the left travel motor. The pressure setting of pressure reducing valve (9) should be 6000 kPa (875 psi).
Show/hide table
 | |
| Illustration 3 | g01945312 |
Pressure reducing valve (parking brake) (7) Adjustment screw (8) Locknut (9) Pressure reducing valve | |
- Return the left travel control lever to the NEUTRAL position.
- In order to adjust pressure reducing valve (9), loosen locknut (8) and turn adjustment screw (7) until the pressure setting at the pressure reducing valve for the left travel motor is 6000 kPa (875 psi).
Note: Turn adjustment screw (7) clockwise in order to increase the pressure. Turn adjustment screw (7) counterclockwise in order to decrease the pressure.
Note: Always make final pressure adjustment on pressure rise.
- Tighten locknut (8) .
- Stop the engine.
- Remove track block (6) from sprocket (5) .
- Remove the cap on fitting (2) .
- Remove the pressure gauge and test fitting from line (1) .
- Reinstall line (1) onto fitting (2) .
Note: In order to adjust the pressure reducing valve on the right travel motor, place stopper (6) in the sprocket for right travel. Install the pressure gauge and test fitting to the right travel motor in the same manner as the left travel motor in order to monitor the pressure reducing valve setting for the right travel motor. Adjust the pressure reducing valve on the right travel motor in the same manner as the adjustment for the left travel motor.
Caterpillar Information System:
G3304B and G3306B Engines Engine Valve Lash - Inspect/Adjust
320 Variable Gauge OEM Undercarriage Hydraulic System Relief Valve (Travel Motor) - Test and Adjust - VH Undercarriage
Undercarriage Reconditioning Bulletin Contents {0374, 4150} Undercarriage Reconditioning Bulletin Contents {0374, 4150}
G3304B and G3306B Engines Accessory Drive - Assemble
320 Variable Gauge OEM Undercarriage Hydraulic System Cylinder Speed - Check - VM Undercarriage
320 Variable Gauge OEM Undercarriage Hydraulic System Cylinder Speed - Check - VH Undercarriage
793F Off-Highway Truck Engine Starting
793F Off-Highway Truck Before Starting Engine
G3304B and G3306B Engines Connecting Rod - Inspect
G3304B and G3306B Engines Engine Oil Pressure - Test
G3304B and G3306B Engines Accessory Drive - Disassemble
320 Variable Gauge OEM Undercarriage Hydraulic System Travel on Level Ground - Test - VM Undercarriage
320 Variable Gauge OEM Undercarriage Hydraulic System Specifications - VH Undercarriage
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 3013 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 3013 - FMI 04
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0296 - FMI 14
2009/06/15 G3512 and G3516 Upgrade for Enhanced Performance and Reliability of Engines with Electronic Ignition Systems (EIS) that Are Rated at 1200 or 1400 rpm {1901, 1902, 1920}
793F and 793F CMD Off-Highway Truck Braking System Solenoid Valve (Brake Accumulator Purge)
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 3381 - FMI 03
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 3381 - FMI 04
C175 Generator Sets Sound Information
C15 and C18 Petroleum Generator Sets Fuel Injector - Inspect/Adjust
793F and 793F CMD Off-Highway Truck Braking System Solenoid Valve (Parking, Secondary Brake)
793F and 793F CMD Off-Highway Truck Braking System Pressure Reducing Valve (Pilot Oil)