C175-16 Locomotive Engine Caterpillar


Gear Group (Rear)

Usage:

C175-16 3A9


图 1g02905956
(2) 凸轮轴驱动齿轮

表 1
327-0824 后齿轮总成和 327-0825 后齿轮总成的技术规格 
项目  数量  零件  技术规格说明 
328-7113 齿轮组轴  直径为 74.970 ± 0.010 mm (2.9516 ± 0.0004 in)。 
307-9789 止推片  新止推片的厚度为 6.35 ± 0.25 mm (0.250 ± 0.010 in)。 
254-5886 惰轮组件  安装后,惰轮组件中 254-5887 衬套的孔径为 75.060 ± 0.010 mm (2.9551 ± 0.0004 in)
衬套的安装深度为 2.0 ± 0.5 mm (0.08 ± 0.02 in)。 
惰轮组件上的标记 (5) 必须和曲轴齿轮 (7) 上的标记对准。 
345-8567 定位销  定位销的突出量为 10.0 ± 0.5 mm (0.39 ± 0.02 in)。 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.