834K Wheel Dozer Systems and 836K Landfill Compactor Systems Caterpillar

Control Valve (Bulldozer Tilt)

Usage:

834K L4Y

Show/hide table




Illustration 1	g06242886

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	1	Nut	Torque to 20 ± 3 N·m (177 ± 27 lb in).
2	2	313-7668 Solenoid Valve Gp	Torque to 35 ± 3 N·m (26 ± 2 lb ft).
3	2	4T-1108 Plug	Torque to 145 ± 15 N·m (107 ± 11 lb ft).
4	2	2S-2596 Spring	Length under test force is 7.9 mm (0.31 inch). Test force is 4.226 ± 0.338 N (0.950 ± 0.076 lb). Free length after test is 33.3 mm (1.31 inch).
5	1	348-7104 Spring	First length under test force is 49.16 mm (1.935 inch). First test force is 255 ± 20 N (57 ± 4 lb). Second length under test force is 37.38 mm (1.472 inch). Second test force is 1020 ± 82 N (229 ± 18 lb). Free length after test is 53.08 mm (2.090 inch).
6	2	100-8012 Body	Torque to 145 ± 15 N·m (107 ± 11 lb ft).
7	1	9J-8126 Orifice Plug	Torque to 9 to 14 N·m (80 to 124 lb in).
8	1	352-9954 Spring	Length under test force 1 is 39.4 mm (1.55 inch). Test force 1 is 304.2 ± 24.0 N (68.4 ± 5.4 lb). Length under test force 2 is 35.5 mm (1.40 inch). Test force 2 is 655.2 ± 52.0 N (147.3 ± 11.7 lb). Free length after test is 42.78 mm (1.684 inch).
9	1	100-8011 Plug	Torque to 300 ± 40 N·m (221 ± 30 lb ft).
10	1	4T-1701 Spring	Length under test force is 59.0 mm (2.32 inch). Test force is 108 ± 5 N (24 ± 1 lb). Free length after test is 64.70 mm (2.547 inch).
11	5	4B-4278 Washer	As required, use maximum of five washers: Thickness of one new washer is 1.6 mm (0.06 inch).
12	1	260-8590 Shuttle Valve Gp	Torque to 16 ± 3 N·m (142 ± 27 lb in).

Caterpillar Information System:

320GC, 320 and 323 Excavators Machine Systems Bucket Cylinder - Disassemble

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Control Valve (Bulldozer Tilt)

973K Track-Type Loader Machine Systems Cab Tilt Cylinder - Remove and Install

D9R Track-Type Tractor Monitoring System

336, 336 GC and 340 Excavator Systems Check Valve (Return Makeup)

C32 Tier 4 Final Marine Commercial Engines Solenoid Valve - Test - Engine

D6 Track-Type Tractor Systems Piston Motor (Steering)

C32 Tier 4 Final Marine Commercial Engines Solenoid Valve - Test - Aftertreatment

An Improved Factory Assembly Process Has Been Implemented on Certain Telehandlers {3030, 3061, 3064, 3066, 3101, 3160} An Improved Factory Assembly Process Has Been Implemented on Certain Telehandlers {3030, 3061, 3064, 3066, 3101, 3160}

C32 Tier 4 Final Marine Commercial Engines Speed Control - Test

973K Track-Type Loader Engine Supplement Air Cleaner - Remove and Install

320GC, 320 and 323 Excavators Machine Systems Swing Drive - Remove and Install

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Combination Valve

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Diesel Exhaust Fluid Tank

C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Pump

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Refrigerant Condenser - Mounting

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Hydraulic Oil Cooler

320GC, 320 and 323 Excavators Machine Systems Bucket Cylinder - Assemble

320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Disassemble

PL61 Pipelayer Operator Controls

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Steering Cylinder - Mounting

973 K Track Type LoaderElectrical Hydraulic Troubleshooting General Information

973 K Track Type LoaderElectrical Hydraulic Troubleshooting Service Tools

973 K Track Type LoaderElectrical Hydraulic Troubleshooting Connector Locations