An Improved Factory Assembly Process Has Been Implemented on Certain Telehandlers {3030, 3061, 3064, 3066, 3101, 3160} Caterpillar


An Improved Factory Assembly Process Has Been Implemented on Certain Telehandlers {3030, 3061, 3064, 3066, 3101, 3160}

Usage:

C3.4B CJ4
OEM
OEMTPG145 (S/N: GW41-1000; JP41-1000; DY61-1000)
Telehandler
TH336C (S/N: MJR1-251)
TH337C (S/N: DJB1-399)
TH3510D (S/N: SD31-1000; CF51-1000)
TH406C (S/N: GAT1-245)
TH407C (S/N: MLH1-693; JJT1-160)
TH414C (S/N: KEK1-307; RWW1-159)
TH417C (S/N: RRJ1-217; RRW1-178)
TH514C (S/N: MWC1-347; KKW1-252)
TH514D (S/N: DL41-1000)
TL1055C (S/N: MDD1-196; KDE1-1141)
TL1255C (S/N: SXM1-173; DHW1-973)
TL642C (S/N: THG1-815; THL1-203)
TL943C (S/N: SXH1-227; THH1-1014)

Description Of Change: An improved factory assembly process has been implemented on the machines listed above. This new process will improve the clutch piston seal life and, also the service life of the forward High / THIRD clutch and shaft.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

A sizing pot tool has been introduced to the production assembly process in order to compress the piston seals prior to assembly into the transmission. This prevents the damage to the piston seals and increases the service life of the component.

The sizing pot tool and process were introduced in production on 04 February 2014, effective with the transmission serial numbers that are listed in Table 1.

Table 1
List of Transmissions with Improved Assembly Process 
Part Number  Part Name  Transmission Serial Number 
316-1937  Power Shift Transmission Ar  S/N:P1R03093-UP 
316-1940  Transmission Ar  S/N:P1Y01242-UP 
363-3032  Power Shift Transmission Ar  S/N:P2F03207-UP 
363-3033  Power Shift Transmission Ar  S/N:P2G01463-UP 
363-3034  Transmission Ar  S/N:P2H01426-UP 
363-3035  Transmission Ar  S/N:P2J02116-UP 
458-3817  Power Shift Transmission Ar  S/N:4A201001-UP 
458-3821  Transmission Ar  S/N:4A201001-UP 
458-3823  Power Shift Transmission Ar  S/N:4A401001-UP 
458-3825  Power Shift Transmission Ar  S/N:JP401001-UP 
460-9942  Transmission Ar  S/N:CF501001-UP 
460-9943  Power Shift Transmission Ar  S/N:SD301001-UP 
460-9944  Power Shift Transmission Ar  S/N:GW401001-UP 
464-3296  Transmission Ar  S/N:DY601001-UP 
391-9649  Power Shift Transmission Ar  S/N:MC301192-UP 
391-9652  Transmission Ar  S/N:JP301226-UP 
391-9650  Transmission Ar  S/N:GW301223-UP 
448-5411  Power Shift Transmission Ar  S/N:AS401001-UP 

Note: A sizing tool is not necessary for dealer repairs or rebuilds due to the slower assembly times compared to the factory production process.

Caterpillar Information System:

C32 Tier 4 Final Marine Commercial Engines Speed Control - Test
973K Track-Type Loader Engine Supplement Air Cleaner - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Swing Drive - Remove and Install
C32 Tier 4 Final Marine Commercial Engines Speed/Timing - Test
973K Track-Type Loader Machine Systems Direction and Speed Control - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Check Valve (Return Makeup)
D6 Track-Type Tractor Systems Piston Pump (Steering)
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Control Manifold - Disassemble - Pilot
336, 336 GC and 340 Excavator Systems Swing System
C27 and C32 Engine for MD6250 and MD6310 Drill Fuel Priming Pump - Test
D6 Track-Type Tractor Systems General Information (Steering System)
Harness Connection Guidance for Product Link PL321 and Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1408, 7490, 7606, 7610, 7620} Harness Connection Guidance for Product Link PL321 and Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1408, 7490, 7606, 7610, 7620}
C32 Tier 4 Final Marine Commercial Engines Solenoid Valve - Test - Aftertreatment
D6 Track-Type Tractor Systems Piston Motor (Steering)
C32 Tier 4 Final Marine Commercial Engines Solenoid Valve - Test - Engine
336, 336 GC and 340 Excavator Systems Check Valve (Return Makeup)
D9R Track-Type Tractor Monitoring System
973K Track-Type Loader Machine Systems Cab Tilt Cylinder - Remove and Install
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Control Valve (Bulldozer Tilt)
320GC, 320 and 323 Excavators Machine Systems Bucket Cylinder - Disassemble
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Control Valve (Bulldozer Tilt)
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Combination Valve
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Diesel Exhaust Fluid Tank
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.