1987/08/03 Caterpillar

New Performance Analysis Report (PAR) Brochure And Directory Of Par Dealers Available {0370,1000}

Usage:

All Caterpillar Truck Engines

"Is Your Truck Engine Performing Up To PAR?", is the title of a new customer brochure for the Performance Analysis Report program. This brochure is available to dealers in packages of 50 by ordering Form PEDP0026. This customer brochure points out how PAR is more than just a chassis dyno test. The brochure discusses the primary factors by which truck engine performance will be evaluated and how wheel horsepower will be used. It also points out that truck specifications and driving technique affect vehicle performance.

A new directory of PAR dealers is also available. Dealers can order Form LEDT4211 for a package of 25. The directory uses the same format as the Truck Engine Parts and Service Directory with shop hours, after hours phone numbers and directions to authorized PAR locations in North America.

Caterpillar Information System:

1987/08/03 Remanufactured Short Blocks Available For All 3304 Engines {1200}

1987/08/03 New Service Tools Available {0600}

1987/08/03 More Test Gauges, Adapters And Hoses Available For All Power Shift Transmissions And Hydraulic Systems {0783,0784,3150,5050}

1987/07/27 Box Labels Available For Pleasure Craft Cruise Kits{1000}

1987/07/20 Gas Regulator Setting Tool Group Available {0782}

1987/07/20 Remanufactured Electronic Modular Control Panel Modules (EMCP) For Package Generator Sets {7002}

1987/07/20 Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}

1987/07/20 New Cylinder Liner Available {1216}

1987/07/13 New Engines Rated @ 160 kW (210 hp) @ 2600 rpm Must Be Rerated When Used To Replace 2800 rpm Engines{0374}

1987/07/06 New Electronic Modular Control Panel (SR-4 Generator Mounted){4450,7002}

1987/07/06 New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}

1987/07/06 New Sealant Used On Oil Pan Mounting Bolts{1201,1302}

1987/08/03 Temperature Regulator Housing Parts And Water Pump Adapter Have More Resistance To Erosion And Galvanic Corrosion; Guidelines On Grounding Of Electrical System And Cooling System Maintenance {1350,1361,1393,1400}

1987/08/03 New Caterpillar Sea Trial Rules Of Thumb Pocket Reference Card {0372}

1987/08/10 Improved Gaskets Used In Central Structure Cover Groups, Jacket Water Lines Groups, Jacket Water Heater Groups And Water Aftercooler Groups{1350,1063}

1987/08/10 Fuel Heaters Should Be Thermostatically Controlled Or Self-Regulated{1250,1260,1296}

1987/08/10 Remanufactured Turbocharger Groups And Cartridges{1052,1053}

1987/08/24 More Accurate And Easier Method To Adjust 8T1815 Or 6L5438 Main Shaft Bearing{3306,3351}

1987/08/24 Improved High Temperature Seals Available{1252,1120}

1987/08/24 Engine Oil Refill Capacity Decreased{1213,1326}

1987/08/24 Additional Engine Tilt Installation Angles And Engine Dipstick Markings{1326}

1987/08/24 Dynamic Timing Charts Available For Most Popular 3208 And 3406 Truck Engine Ratings{1272}

1987/08/24 New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available{0600}

1987/08/24 New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available{0600}