D8R and D8T TRACK-TYPE TRACTORS Machine Systems Caterpillar


Control Valve (Winch)

Usage:

D8R DWJ


Illustration 1g06153463

Table 1
Specification for 475-5119 Control Valve Gp 
Item  Qty  Part  Specification Description 
198-2914 Nut  Torque to 20 ± 3 N·m (177 ± 27 lb in)
313-7668 Solenoid Valve Gp  Torque to 35 ± 3 N·m (26 ± 2 lb ft).
Nominal voltage is 24 VDC.
Coil resistance at 25 °C (77 ° F) is 5.0 ± 0.3 ohms. 
4T-1108 Plug  Torque to 145 ± 15 N·m (107 ± 11 lb ft)
100-8012 Body  Torque to 145 ± 15 N·m (107 ± 11 lb ft)
260-8590 Shuttle Valve Gp  Torque to 16 ± 3 N·m (142 ± 27 lb in)
352-9954 Spring  Length under first test force is 39.4 mm (1.55 inch).
First test force is 304.2 ± 24.0 N (68.4 ± 5.4 lb).
Length under second test force is 35.5 mm (1.40 inch).
Second test force is 655.2 ± 52.0 N (147.3 ± 11.7 lb).
Free length after test is 42.78 mm (1.684 inch)
100-8011 Plug  Torque to 300 ± 40 N·m (221 ± 30 lb ft)
2S-2596 Spring  Length under test force is 7.9 mm (0.31 inch).
Test force is 4.226 ± 0.338 N (0.950 ± 0.076 lb).
Free length after test is 33.3 mm (1.31 inch)
4T-1701 Spring  Length under test force is 59 mm (2.3 inch).
Test force is 108 ± 5 N (24 ± 1 lb).
Free length after test is 64.70 mm (2.547 inch)
4B-4278 Washer  As required, use the washer in order to adjust the pressure setting. Maximum five washers can be used for the adjustment of pressure setting.
Thickness of one washer is 1.6 mm (0.06 inch)
10  9J-8126 Orifice Plug  Torque to 9 to 14 N·m (80 to 124 lb in)

Caterpillar Information System:

D9R Track Type Tractors Machine System Specification Bogie Suspension
New Engine Software for Certain C7.1 Machine Engines {7620} New Engine Software for Certain C7.1 Machine Engines {7620}
D8R and D8T TRACK-TYPE TRACTORS Machine Systems Joystick Control and Mounting
Fuel Level May be Reported Intermittently on Certain Cat® Products {7606} Fuel Level May be Reported Intermittently on Certain Cat® Products {7606}
Improved Planet Pin Retention Now Used on AD45B Underground Articulated Trucks {4001, 4008, 4051} Improved Planet Pin Retention Now Used on AD45B Underground Articulated Trucks {4001, 4008, 4051}
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Disassemble - V-Ring Seal
3512E and 3516E Marine Engines Auxiliary Water Pump - Remove
PL61 Pipelayer Machine Systems Boom Winch, Hook Winch and Winch Frame - Remove and Install
950 GC Wheel Loader Power Train Differential (Standard)
New Extension Pipe for Precleaner Is Now Available on Certain 992K Large Wheel Loaders {1055} New Extension Pipe for Precleaner Is Now Available on Certain 992K Large Wheel Loaders {1055}
994K Wheel Loader Machine Systems Relief Valve (Pilot) - Remove and Install
992K Wheel Loader Calibrations (Operator Monitor)
D8R and D8T TRACK-TYPE TRACTORS Machine Systems Bulldozer Tilt Control Valve
A New Seal Is Available to Dampen the Vibration of the Brake Accumulators on Certain L-Series and M-Series 950 and 962 Medium Wheel Loaders {4263, 4269, 7513} A New Seal Is Available to Dampen the Vibration of the Brake Accumulators on Certain L-Series and M-Series 950 and 962 Medium Wheel Loaders {4263, 4269, 7513}
Slope Assist Calibration On Certain D6 and D8T Track-Type Tractors {7220} Slope Assist Calibration On Certain D6 and D8T Track-Type Tractors {7220}
D9R Track Type Tractors Machine System Specification Air Cleaner
950GC Wheel Loader Engine Supplement Aftercooler Core - Remove and Install
3512E and 3516E Marine Engines Auxiliary Water Pump - Disassemble
3512E and 3516E Marine Engines Auxiliary Water Pump - Assemble
3512E and 3516E Marine Engines Pistons and Connecting Rods - Remove
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Assemble - V-Ring Seal
950 GC Wheel Loader Power Train Fixed Axle and Oscillating Axle
PL61 Pipelayer Machine Systems Hook Winch - Remove and Install
Improved Push Arm Assemblies are Now Available for Certain D7E Track-Type Tractors {6061} Improved Push Arm Assemblies are Now Available for Certain D7E Track-Type Tractors {6061}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.