D9R Track Type Tractors Machine System Specification Caterpillar


Bogie Suspension

Usage:

D9R WDM


Illustration 1g06152734

Table 1
Specification for 1Q-3634 Suspension Group 
Item  Qty  Part  Specification description 
7G-0521 Inner Collar  Do not use lubricant while pressing inner collar on pin. 
7G-0522 Outer Collar  Do not use lubricant while pressing outer collar on pin. 
1Z-9354 Duo-Cone Seal As  The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal. The metal seal rings must be assembled square with the bore. Do not bulge or twist the rubber toric seal. 
32  1Z-9353 Cartridge Pin Assembly  Before assembly of cartridge pin, apply black Loctite Graphite-50 Anti-seize to the pin bores. 
7G-0520 Terminal Bushing  Diameter is 63.80 ± 0.02 mm (2.512 ± 0.001 inch)

Caterpillar Information System:

New Engine Software for Certain C7.1 Machine Engines {7620} New Engine Software for Certain C7.1 Machine Engines {7620}
D8R and D8T TRACK-TYPE TRACTORS Machine Systems Joystick Control and Mounting
Fuel Level May be Reported Intermittently on Certain Cat® Products {7606} Fuel Level May be Reported Intermittently on Certain Cat® Products {7606}
Improved Planet Pin Retention Now Used on AD45B Underground Articulated Trucks {4001, 4008, 4051} Improved Planet Pin Retention Now Used on AD45B Underground Articulated Trucks {4001, 4008, 4051}
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Disassemble - V-Ring Seal
3512E and 3516E Marine Engines Auxiliary Water Pump - Remove
PL61 Pipelayer Machine Systems Boom Winch, Hook Winch and Winch Frame - Remove and Install
950 GC Wheel Loader Power Train Differential (Standard)
New Extension Pipe for Precleaner Is Now Available on Certain 992K Large Wheel Loaders {1055} New Extension Pipe for Precleaner Is Now Available on Certain 992K Large Wheel Loaders {1055}
994K Wheel Loader Machine Systems Relief Valve (Pilot) - Remove and Install
992K Wheel Loader Calibrations (Operator Monitor)
994K Wheel Loader Machine Systems Expansion Tank - Remove and Install
D8R and D8T TRACK-TYPE TRACTORS Machine Systems Control Valve (Winch)
D8R and D8T TRACK-TYPE TRACTORS Machine Systems Bulldozer Tilt Control Valve
A New Seal Is Available to Dampen the Vibration of the Brake Accumulators on Certain L-Series and M-Series 950 and 962 Medium Wheel Loaders {4263, 4269, 7513} A New Seal Is Available to Dampen the Vibration of the Brake Accumulators on Certain L-Series and M-Series 950 and 962 Medium Wheel Loaders {4263, 4269, 7513}
Slope Assist Calibration On Certain D6 and D8T Track-Type Tractors {7220} Slope Assist Calibration On Certain D6 and D8T Track-Type Tractors {7220}
D9R Track Type Tractors Machine System Specification Air Cleaner
950GC Wheel Loader Engine Supplement Aftercooler Core - Remove and Install
3512E and 3516E Marine Engines Auxiliary Water Pump - Disassemble
3512E and 3516E Marine Engines Auxiliary Water Pump - Assemble
3512E and 3516E Marine Engines Pistons and Connecting Rods - Remove
D10T2 Track-Type Tractor Engine Supplement Fan Drive - Assemble - V-Ring Seal
950 GC Wheel Loader Power Train Fixed Axle and Oscillating Axle
PL61 Pipelayer Machine Systems Hook Winch - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.