Remanufactured Programmable Electronic Engine Controls (PEEC) {1250}
Usage:
3406B (PEEC) Truck Engines Rated @ 215-260 kW (285-350 hp)
Reference: Information Release, REM86-25A, Remanufactured 3406B Programmable Electronic Engine Controls (PEEC).
Caterpillar Information System:
1987/06/01 Use Correct Pistons And Rings For 3406B Truck Engines {1214,1215}
1987/06/01 Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/05/25 Truck Performance Diagnostic Guide Available{0374,1219,1227}
1987/05/25 Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25 Improved Start Switch Used{1416}
1987/05/25 New Service Tools Available{0600}
1987/05/25 1U5796 Pressure Differential Gauge Group Available For Load Sensing Hydraulic Systems and Differential Steering System{0770,0784,5050}
1987/05/18 Improved Oil Temperature Regulator Gasket{1330}
1987/05/18 New Precombustion Chamber Seal Available{1100,1106}
1987/05/18 Be Sure Tubing Clamps That Fasten Air-To-Air Aftercooler To Air Lines Are Correctly Installed{1058}
1987/05/18 Hollow Dowel Relieves Accessory Drive Oil Leakage{1207,1166}
1987/05/18 New Plastic Water Sleeve Used{1380}
1987/06/01 Fuel Injector Trim Bolt {1257}
1987/06/01 Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01 Exhaust Manifold Thermocouple Has Longer Insulated Leads {1050,1408}
1987/06/15 Caterpillar Original Equipment Paint Products (U.S. And Canada) {7559}
1987/06/15 New Face Films For Electronic Monitoring System (EMS) Panels {7490}
1987/06/15 1U5495 Latch Group Available For Earlier Large Duo-Cone Seal Installers {0700,4052}
1987/06/15 New 1U5752 Retainer Tool Available To Service Hydrostatic Transmissions {0721}
1987/06/15 New 1U5230 Hand Pump (General Purpose Hydraulic) Available {0646}
1987/06/15 New Relief Valve Guide Used In Oil Pump Groups {1304}
1987/06/15 All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing {1203}
1987/06/15 Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/29 Recommendations For Reusability Of Pistons With Crater Rim Cracks{1214}