Operator Profile Menu
Show/hide table
Illustration 1 | g06007543 |
Application Profile Menu |
Navigate to Application Profiles
Show/hide table
Illustration 2 | g06022570 |
Navigate to Application Profiles (No Operator ID)
The Application Profiles feature allows a machine owner to create 19 sets of operating parameters which are suited for typical machine operation. At key ON, the display will load the last application profile that was loaded prior to key OFF. Each operator has access to all the profiles.
Show/hide table
Illustration 3 | g06022574 |
- Navigate to Application Profiles menu.
- Press the information button in the right banner of the Main Display Screen to navigate to the Main Menu.
- From the Main Menu, scroll to the Operator menu selection using the down arrow key and click OK in the right banner.
- From the Machine Setting menu, scroll to the Application Profiles selection and click OK in the right banner.
The following Settings are available to the user to be configured for each application profile. Settings for the Factory Default profile are listed in the table below. The Factory Default Profile cannot be deleted or edited.
Show/hide table
Factory Default Settings | |
---|---|
Machine Setting | Factory Default |
Bi-Directional Forward Setting | 2.0 |
Bi-Directional Reverse Setting | 2.4 |
Blade Response | Standard |
Steering Modulation | Medium |
Brake Pedal Deceleration Function Enable Status | Enabled |
Auto Traction Control Enable Default Setting | Disabled |
Auto Traction Control Aggressiveness | Default |
Automatic Engine Speed Control | Enable |
Fan Purge Duration | 25 sec |
Fan Purge Interval | 20 min |
Brightness Day | 90% |
Brightness Night | 40% |
Languages | English |
Units | Metric |
Show/hide table
Illustration 4 | g06008771 |
- Select Application Profile.
- Scroll to the Select Profile selection in the Operator menu and Click the OK button.
- Scroll to select the preferred application profile and Click the OK button. The programmed parameters associated with the selected operator profile will be displayed.
- Click the OK button if the displayed operating parameters are specified to suit your application. "Applying Settings" will be displayed until the settings are loaded.
Note: If the profile fails to load within 30 seconds, the screen returns to "Select Profile" in the Operator Menu.
Show/hide table
Illustration 5 | g03863088 |
- Save Profile
- Navigate to "Save Profile" selection in the Operator menu and Click the OK button. The Save Profile menu will display all current Machine Settings. If settings are suitable, click the OK button to advance to the "Save To" menu.
- The "Save To" menu allows for two options: "Create New" profile and Overwrite existing profile.
Show/hide table
Illustration 6 | g03863085 |
- Overwrite Existing Profile.
- Scroll to desired profile name and click the OK button to bring up the "Save To" menu.
- Scroll to the profile name you wish to overwrite. Click the OK button to advance to the "Save Profile"Menu.
- Click the OK button to verify that you want current machine settings to overwrite the selected profile.
Show/hide table
Illustration 7 | g03871398 |
(1) Right Arrow Icon |
- Create New Profile
- Scroll to the "Create New" selection and Click the OK button. The "Enter Name" screen will appear.
- Use Arrow Keys to scroll to each letter of the profile name and click the OK button for each consecutive letter.
- When the name is complete, select the right arrow icon (1) in the lower right corner of the screen to complete the profile name entry. This will direct the user back to the Operator menu.
Show/hide table
Illustration 8 | g03871439 |
Show/hide table
Illustration 9 | g03863092 |
Caterpillar Information System:
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
312D2 and 313D2 Excavators Lubricant Viscosities - Fluids Recommendations
D6K and D6K2 Track-Type Tractor Monitoring System Machine Menu
D6K and D6K2 Track-Type Tractor Monitoring System Display Menu
910M, 914M, 918M, 910K, and 914K Wheel Loader Machine Systems Tilt Cylinder - Remove and Install
PL61 Pipelayer Maintenance Interval Schedule
950 GC Wheel Loader Braking and Hydraulic Fan System Hydraulic Fan System
PL61 Pipelayer Lubricant Viscosities - Fluids Recommendations
D6K and D6K2 Track-Type Tractor Monitoring System Diagnostic Operation
PL61 Pipelayer Battery Disconnect Switch
D6T XE Electrical & Hydraulic Troubleshooting Data - Transport
950 GC Wheel Loader Braking and Hydraulic Fan System Brake Control Valve (Parking)
D6K and D6K2 Track-Type Tractor Monitoring System Pop-Up Messages
D6K and D6K2 Track-Type Tractor Monitoring System Symptom Troubleshooting
D6K and D6K2 Track-Type Tractor Monitoring System Display Is Blank
312D2 and 313D2 Excavators Hydraulic System Oil - Change
D6K and D6K2 Track-Type Tractor Monitoring System Wiring Harness (Open Circuit) - Test
D6K and D6K2 Track-Type Tractor Monitoring System Wiring Harness (Short Circuit) - Test
D6K and D6K2 Track-Type Tractor Monitoring System Module - Replace
854K Wheel Dozer Operator Controls
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Speed/Timing - Test
Cat® Grade Control for D6K2 Track-Type Tractors Display Firmware Upgrade
Cat® Grade Control for D6N Track-Type Tractors Display Firmware Upgrade
Installation Procedure for Product Link® PL161 System {7606} Installation Procedure for Product Link® PL161 System {7606}