Totals (Cat Production Measurement Is Installed)
Totals: The Totals button allows the operator to view the machine’s total operating hours.
Illustration 1 | g03888976 |
(1) Totals button |
Press the "Totals" button (1) on the right side of the Display. The Totals menu list page will appear.
Totals > Lifetime
Note: These are the totals when Cat® Production Measurement is installed.
Illustration 2 | g06095925 |
(2) Lifetime menu button
(3) Non-Interactive Scroll Bar with sliding indicator (4) UP Arrow button (5) OK button (6) DOWN Arrow button (7) BACK button (8) HOME button |
Illustration 3 | g06096090 |
- Press the "Totals" button (1) on the right side of the Display. The Totals menu page will appear.
- Press the "Lifetime" menu button (2). The button will highlight in blue, then yellow. The Lifetime page will appear showing the machine’s lifetime operating totals.
Note: If the Lifetime menu button is not visible, scroll through the menu button group list by using the UP Arrow button (4) or the DOWN Arrow button (6). The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Use the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the Lifetime Totals data page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Press the BACK button (7) to return to the previous menu.
- Press the HOME button (8) to return to the home page.
Totals > Trip A
Models 988, 990, and 994 when Cat® Production Measurement is installed and enabled.
Note: These are the totals when Cat Production Measurement is installed.
Illustration 4 | g06096106 |
(9) Trip A menu button |
Illustration 5 | g06096119 |
(3) Non-Interactive Scroll Bar with sliding indicator
(4) UP Arrow button (6) DOWN Arrow button (7) BACK button (8) HOME button (10) RESET button |
- Press the "Totals" menu button (1) on the right side of the Display. The "Totals" menu will appear.
- Press the "Trip A" menu button (9). The button will highlight in blue, then yellow. The Trip A data page will appear showing the machine’s Trip A Totals data.
Note: If the Trip A menu button is not visible, scroll through the menu button group list by using the UP Arrow button (4) or the DOWN Arrow button (6). The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Use the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the Trip A Totals page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Press the BACK button (7) to return to the previous page.
- Press the HOME button (8) to return to the home page.
Note: Trip A Totals can be reset. Press the RESET button (10) to clear the Trip A Totals data.
Totals > Trip B
Models 988, 990, and 994 when Cat Production Measurement is installed and enabled.
Note: These are the totals when Cat Production Measurement is installed.
Illustration 6 | g03889055 |
(11) "Trip B" menu button |
Illustration 7 | g06096136 |
(10) RESET button |
- Press the "Totals" button (1) located on the right side of the Display. The "Totals" menu page will appear.
- Press the Trip B button (11). The button will highlight in blue, then yellow. The Trip B data page will appear showing the machine’s Trip B Totals.
Note: If the Trip B menu button is not visible, scroll through the menu button group list by using the UP Arrow button (4) or the DOWN Arrow button (6). The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Use the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the Trip B Totals data page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Press the BACK button (7) to return to the previous page.
- Press the HOME button (8) to return to the home page.
Note: Trip B Totals can be reset. Press the RESET button (10) to clear the Trip B Totals data.
Totals > Material
Models 988, 990, and 994 when Cat Production Measurement is installed and enabled.
Note: These are the totals when Cat Production Measurement is installed.
Illustration 8 | g06096154 |
(3) Non-Interactive Scroll Bar with sliding indicator
(4) UP Arrow button (6) DOWN Arrow button (7) BACK button (8) HOME button (10) RESET button (12) Material menu button |
- Press the "Totals" button (1) located on the right side of the Display. The "Totals" menu will appear.
- Press the Material menu button (12). The button will highlight in blue, then yellow. The Material data page will appear showing the machine’s Material Totals data.
Note: If the Material menu button is not visible, scroll through the menu button group list by using the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the menu page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Use the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the Material Totals page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Press the BACK button (7) to return to the previous page.
- Press the HOME button (8) to return to the home page.
Note: Material Totals can be reset. Press the RESET button (10) to clear the Material Totals data.
Totals > Operator
Models 988 and 990 when Cat Production Measurement is installed and enabled.
Note: These are the totals when Cat Production Measurement is installed.
Illustration 9 | g06096169 |
(3) Non-Interactive Scroll Bar with sliding indicator
(4) UP Arrow button (6) DOWN Arrow button (7) BACK button (8) HOME button (13) Operator menu button |
- Press the "Totals" button (1) on the right side of the Display. The "Totals" menu will appear.
- Press the "Operator" button (13). The button will highlight in blue, then in yellow. The Operator page will appear showing the machine’s Operator Totals data.
Note: If the Operator menu button is not visible, scroll through the menu button group list by using the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the menu page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Use the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the Operator Totals page. The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- Press the BACK button (7) to return to the previous menu.
- Press the HOME button (8) to return to the home page.
Totals > Cycle Timer
Models 988, 990, and 994 when Cat Production Measurement is installed and enabled.
Note: The totals when Cat Production Measurement is installed.
Illustration 10 | g06096181 |
(7) BACK button
(10) RESET button (14) "Cycle Timer" menu button |
- Press the "Totals" button (1) on the right side of the Display. The "Totals" menu will appear.
- Press the "Cycle Timer" button (14). The button will highlight in blue, then in yellow and the "Cycle Timer" page will appear.
Note: If the Cycle Timer menu button is not visible, scroll through the menu button group list by using the UP Arrow button (4) or the DOWN Arrow button (6). The Menu Sliding Indicator of the Non-Interactive Scroll bar (3) will move accordingly with the page.
- To reset the Cycle Timer, press the RESET button (10) on the right side of the display.
- Press the BACK button (7) to return to the previous page.
- Press the HOME button (8) to return to the home page.
Totals (Cat Production Measurement Is NOT Installed)
Totals > Lifetime
Note: The totals when Cat Production Measurement is not installed.
Illustration 11 | g06096190 |
(7) BACK button
(8) HOME button (15) "Lifetime" menu button |
- Press the Totals button (1) on the right side of the Display. The Totals menu will appear.
- Press the Lifetime button (15).The menu button will highlight in blue, then in yellow. Lifetime menu page will appear showing the machine’s Lifetime Totals data.
- Press the BACK button (7) to return to the previous menu.
- Press the HOME button (8) to return to the previous menu.
Totals > Trip
Note: The totals when Cat Production Measurement is not installed.
Illustration 12 | g06096194 |
(7) BACK button
(8) HOME button (10) RESET button (16) "Trip" menu button |
- Press the Totals button (1) on the right side of the Display. The Totals menu page will appear,
- Press the Trip menu button (16). The menu button will highlight in blue, then in yellow. The Trip data page will appear showing the machine’s Trip Totals data.
- Press the BACK button (7) to return to the previous page.
- Press the HOME button (8) to return to the previous page.
Note: Trip Totals can be reset. Press the RESET button (10) to clear the Trip Totals data.